Separate names with a comma.
Some features disabled for guests. Register Today.
What kind of t nut clamps are people using to hold their work down on the LEAD CNCs? Do you use drop in t nuts? The t nut clamps I am seeing seem...
DONE! and its working! BTW carpet tape withs GREAT to hold down wood onto aluminum.. might need a chisel to free it! so GO SPARINGLY! lol and to...
32 or 64 bit?? Ah hold on....in my haste I may have downloaded the 64bit ver :banghead:....I see there is a 32bit ver down the list, perhaps this...
The open-rail is rather inexpensive, and would not cost much to replace as it wears down. This will be a good experiment to see how many hours...
It's not the MDF he has a problem with. It's the lack of hold down solutions. Since I'll be making multiples of everything, I am making specific...
MDF does work great if you have the right vacuum source, my old shop had a 10hp vacuum pump with a 100 gallon pump down vessel that allowed me to...
Hi Mark: Question, the lead screw 8MM seems smaller in diameter. When you torque down the flexible coupling, pinch side of the acme screw it won't...
...for a Spoiler board. In the instructions it talks about Hold Down clamps that will be available in the store. Have you added this item to the...
...Immediately, click Reset.... Should be modified to... 9) Immediately, Hold down Reset.... To respect the phrasing you used in Step 7 Good job...
How were you planning to hold that workpiece down? You either need to add tabs to the toolpath or use the masking tape and superglue method -...
...and Staples | Polymer Composite Plastic Nails, Plastic Staples & Plastic Fasteners) which are a plastic/ploymer nail used to hold down workpieces.
Yep, that is what I use to hold stuff down those Irwin ones.
Hi Mark Carew , I am from Turkey.I take care of you glass cutting machines projects.Do you help me? Thank you very much. RIDVAN ARIK...
...always hold the material down in the same place? What I do is hold down the material I'm going to cut, then I zero the machine at the lower...
That's strange. I verified that the shift key is active in the app, as it will change the case of letters in the prompt. However, it does not seem...
...The other method I have found works good is that I run the hold down strips along side the project to stop it from twisting. Here's a pic of...
...I cut a quarter of an inch off, the Y Beam should clear all my hold down bolts. Hoping it works, if not, it was a great first project...
...press enter. If the machine moves, then its not registering the hold down of the shift key. Side note: I think I'll add some custom macros...
I put these on clamps thingiverse which will hold 1/2" plywood down atop the MDF wasteboard on the Lead Machine. They are more durable than I...
...beams. Drill holes in the table and there you have a vacuum hold down. Any thoughts about this? It helps to give the machine more rigidity and...
