Separate names with a comma.
Some features disabled for guests. Register Today.
...runs OK. With GRBL_HAL (freshly flashed from Control) I get 'error 9' as reported by @Niuulh (As an aside, I noticed that the probe status in...
...following file : "cnc.tap". But nothing happened. I could read error 9 upon the screen of the Offline Controller. Could you help please with...
Error 9 would come after some alarm. Probably alarmed because homing failed due to the motor not working Motor - from your video - looks like...
Good day folks, i recently bought and assembled a 1515 machine. i was in the process of doing a spoil board and it started running into an alarm...
...standard way (Z is up, X is right Y is back)? You mentioned a error 9 and hard limit strikes in the deleted post. 3) If using Openbuilds...
There are several problems with that file. First line '%' shouldnt be there. Control will ignore it for you, but in general it shouldnt be...
Yes I have flashed 2 axis fw, although it has made no difference to the control gui. I can still move z axis (virtually), and I can still go to z...
Hi Peter, Forgot to mention but I did. Homing, position spindle for job, set zero , run job —> error 9 thanks for your swift reply!
Hi All, I have a problem: I am trying to surface a spoil board I purchased from SainSmart, which is the same size as the aluminum bed of the...
That would be a function of Grbl itself, not the sw... See gnea/grbl for details
...further, than it did the previous attempt, when it received an "Error 9 - Gcode locked out during alarm or jog state". At this point I...
...origine on my part (-80ish) probe new tool (ok) probe new tool (error 9 on G38.3) probe new tool (same error) So error now doesn't seem...
...on it and feel a little more positive, include the FULL error, Error 9 is usually a symptom of an earlier alarm, so without the full error...
Did the error pop up right after starting the spindle? If so: spindle creates EMI. EMi created a false limit switch trigger. Limits wiring too...
I'll start off by saying I am extremely new to all things CNC. I have some knowledge in 3D printing having built a core-xy 3D printer but have...
Hello friends I have again problems with Openbuilds Control on my RPi4. Without warning it does not start anymore. I have changed absolutely...
Hey Misterg, I was testing this again after setting the macro to run on startup which it did fine. homed the machine, ran the macro from the...
Error 9 is a lockout from a prior alarm. Its merely the symptom of something that happened earlier. Pay note next time it happens to look for the...
Just a bit more on this; I set the VFD to use the operator and the pot on the front and when the machine is moving, and I turn the spindle on...
Thank you for this software. It is amazing! One issue: I encounter an error when attempting to open a Gerber file. An unknown error...
