Separate names with a comma.
Some features disabled for guests. Register Today.
I factory reset my VFD and set it as per this table (note the additional settings PD072, PD011) [IMG] Now I think I'm getting somewhere because...
Then might indeed be something in the job (provide for review along with a Grbl Settings backup for review)
What controller do you have? Please post your grbl settings here. Alex.
Here's what the console on Candle says:
You queue up in one send. G0 X10\nM8
...not be Soft Limits then, so do grab a screenshot so we can see why it errors out. Error 9 is just the symptom, which alarm locked it is the...
I have the same issue: Error 9 G4 P.18 even after homing all a few times. Any suggestions please?
error:9 is "G-code locked out during alarm or jog state". so why is it in an alarm state? do you have homing switches? anything changed?...
Error 9 is a symptom of some earlier alarm. Pay attention to the log and popup errors. Something first happens, causes an alarm, because Grbl is...
Realtime commands aren't text strings, but ascii, should be sent accordingly.
...is triggered in the middle of the work area in the alarm code is Error 9 G-code locked out during alarm or jog state Y406.4000 this error may...
Probe was working but still didnt recognize Z and tried to push through the plate. [ATTACH] [12:04:52] [ $J=G91 G21 X-1000 F8000 ] ok [12:04:52]...
I'm having probe issues as well... I get the dreaded error 9 when I attempt to use the probe. The triggers function as they should when the...
...the machine shutting down . The shut down message was as follows: error 9 G-code locked out during alarm state The error may be just a symptom...
Did you remember to update Z Max Travel in Grbl settings with the longer available Z travel?
...stumped without the machine. Question: What is error 15 or error 9? A better question is how do you make it go away? The best question is...
Spindle startup up just before the G4 pause which waits for spindle to come up to speed right? So spindle spits out EMI and causes a false limits...
I'm having a similar issue - Running a CNC xPRO V3 on an oxcnc build with macOS. It was running fine, but my old mac died, so I replaced it and...
Yes, you don't have a Z axis, default config wants to Home Z first. Non existant Z motor never reaches Z switch so error is correct, it couldn't...
Hi! I'm back with more confusion.. I loaded a fresh gcode generated in the OB CAM and after homing, I launched it. The console immediately tells...
