Separate names with a comma.
Some features disabled for guests. Register Today.
G53 X0 = far right G53 Y0 = far back G53 Z0 = Z lifted up all the way Negative directions. Away from 0 means more left, more front, more down....
I don't think you need JS at all though: Can probably do what you need to do with gcode only G21; Millimeter mode G90; Absolute Positioning G53...
Do add a G0 or G1 too, also add you G20/G21s and G90/G91s too - best to not rely on assumed modals G53X100 is 100mm beyond the limit switch: See...
See docs:blackbox:faq-emi [OpenBuilds Documentation]
Tools and Utils > Interface Settings > Units You mean error says Probe file not found? Remember to prepare the USB Drive: Section 3.3 of...
Try method 3 then (:
1) Update to Firmware v1.52 using method 2 or 3 (server side changes - old firmware does not know about the new Update servers):...
- Try a different computer - Reinstall GPU drivers - Close all other running (even background) applications that may conflict - Reinstall OS
By replying to the email
I don't but its as easy as OpenBuildsCONTROL > Connect > click Grbl Settings tab > scroll down to Y axis acceleration > type in a lower number....
Make sure the computer has OpenBuildsCONTROL running, that OpenBuildsCONTROL is allowed through the firewall, and that the computer can do DNS...
Yes you do! No, it sits between the Power Supply and the Motors. See https://docs.openbuilds.com/blackbox to learn all about wiring it up See...
Try lowering Acceleration and Max Rate values for Y (In Grbl Settings) just to rule out parameters - with the leadscrew nice and tensioned and the...
Broadly speaking, docs:software:file-errors [OpenBuilds Documentation] applies - if the file is not made for CNC work, it probably won't work as...
Yes you can. See page 1 of this thread and the tips in Devtools
No, you can. 10A @ 24v = 240w max 4xmotors at 3A @3v * 2 coils = 18w per motor *4 motors = 72w towards the motors
Ahh ok, but also not directly (just making sure to avoid future damage). The toolhead output is just 5v 10mA logic signal, cannot drive a relay...
Good, just making sure you know. As you mentioned wanting to install a 5v relay.
I think he means the clicking noise (: - particularly because he already had a worn thrust bearing because of it
Have you tried the Tutorials on Carveco's YouTube channel? https://youtube.com/c/Carveco
