Separate names with a comma.
Some features disabled for guests. Register Today.
We do appreciate the "mobile data" scenario, but the reason we are somewhat forceful about updates - is that up-to-date software - means the...
Probe routines command a distance to move, regardless off where it will hit (to deal with sometime parking bit a bit higher etc) - Z has to allow...
Switches can be where-ever = Machine:0,0,0 are at axis maxima Frequently Asked Questions ยท gnea/grbl Wiki Switches in front is fine and from our...
That jus confirms my above suggestions: - homing sets machine coordinates - Soft limits keeps machine inside machine coordinates - Machine...
Yeah dial the current down a bit
No, USB takes preference. Unplug USB to switch to Interface as described on the Connecting Interface to BlackBox page of...
Rethink your workflow - jogged to a different spot, stock mounted a little differently - something is different between the two times Custom...
- Make sure you entered a Negative number in Start/End of Job Z position field (See the tooltips when hovering over them) in Post Options - Make...
What CAM are you using?
Are you referring to the Scaling tool? You can enter Horizonal or vertical and and automatically updates the other field for you to keep the...
Do you have one, or not yet? Nothing printed on the motors themselves? Our system is 24v too so relatively good clue things can be made to work...
Yes, Grbl stores all that info. Its also Grbl telling you the probe operation will violate a soft limit. Its not an Interface issue. Interface...
Thanks for the suggestion
A) make sure you Homed to set Machine Coordinates B) make sure you arent trying to probe to outside the allowed machine envelope (too far down, to...
CAM estimates should be quite close to spot on. If its not, you are CAMing at feeds that exceed your Grbl Max-Rate values, or overly conservative...
Have you got a datasheet / model number of the motors they have on the machine?
Try a different PC as another test step Also possible your controller has picked up damage (its been in use a while - check wiring for loose...
They do sometimes, speak to support.openbuilds.com
No need for a video (: - but if you do get stuck - rather talk to support.openbuilds.com (you already seem to have a duplicate ticket there where...
It will bed in over time, but you can help the initial bedding in by running the nut up and down the leadscrew with a cordless drill chucked onto...
