Separate names with a comma.
Some features disabled for guests. Register Today.
The actuator kits are just some of the more popular assemblies kitted together - use the complete parts catalog (like lego for adults) - to put...
You can use the Macros tab to create custom routines. For Guitars though I would recommend not rezeroing and using alignment pins instead -...
Best to contact the VFD vendor for assistance with their product. We have community contributed writeups for the more popular Huanyang HY-series...
Grbl only deals with 10-15 lines at a time - see Grbl v1.1 Interface ยท gnea/grbl Wiki The host application keeps the buffer full. CONTROL is often...
Yes, $30=24000, $31=0. VFD parameters set to match (Do set Minimum RPM to stop spindle overheating) and the rest just works. 0-10v is industry...
The drivers in BlackBox properly cuts out (Fault LED lit, stays in protection mode until power cycled) so would be more noticeable The xPro had...
Correct yes. See docs.openbuilds.com/blackbox for documentation (:
Make sure you followed the Lightburn instructions in docs.openbuilds.com too
Several options: 1) CAM settings/setup 2) toolpath options 3) review resulting GCODE file Also test laser power from the Tool On menu in CONTROL...
And does your Gcode scale S0-1000 to match? 0-10v is for VFD spindles, not lasers. Don't connect anything to it, particularly not random...
Either not both. Grbl only has one UART, so we switch it between USB and AUX
Zero is stored in Grbl EEPROM. Rehome to re-establish Regarding the other issues, make sure your Interface Firmware is up to date (v1.51 or...
Contact Ooznest support for assistance - see Help and Contact - Ooznest | 3D Printers & CNC Machines | Parts, Kits & More
At this time you will need an Ili9341 2.8" and you have to solder it on as the factory provided one does. The FPC connector cannot be used - the...
Treat yourself to an INTERFACE CNC Touch and plug it into your BlackBox's AUX port Checkout https://docs.openbuilds.com/interface for the...
Run some air-cut tests with router/dust off. The symptoms are clear (at this time), werror is not a string Grbl emits, but scrambled bits could...
Looks like Serial Corruption caused by EMI. See docs:blackbox:faq-emi [OpenBuilds Documentation]
No login required Click the link for a New Support Ticket [ATTACH]
Contact the store via Support > New Ticket for warranty related queries, thanks
Reverted your edit as an addition just to clear things up for others referring to this thread in future (: Sweet, glad you found it. Falls under...
