Separate names with a comma.
Some features disabled for guests. Register Today.
As mentioned before, the new switches are a massive improvement. Those were how they worked, M3 screw not meant for plastic, screwed into the...
Checkout the store OpenBuilds Part Store
Well if you have issues related to EMI, remember the good switches are an option. The M3 screws thread into the Plastic of the switch. Screw head...
1) Take the motors off the machine 2) Try jogging a longish distance - if its stutters/vibrates, see docs:blackbox:faq-identify-motor-coils...
It should be good to around 200-300 lbs yes
Most controller doesn't care about the OS. The software you intend using does - for example Vectric only runs on Windows. OpenBuildsCONTROL runs...
At this point, rather get yourself the new switches : Xtension Limit Switch Kit All round better - fitting old switches to a new build, rather...
Did you order your machine from openbuildspartstore.com, a reseller or elsewhere? Just to confirm as our motors match our profiles, as does our...
Our standard Router Mount has mounting holes in the flat face too. Can attach that to the underside of the table. Or even a complete router lift...
What are you intending on placing on it, happy to let you know if we think it will be too much
Grbl setting still default (step timing and the like?) Applied a little PTFE (for example WD40 Dry Lube) to the leadscrew?
Settings are spot on, definitely a loose terminal
Please contact the store via Support for assistance Thanks
Please also post a Grbl Settings backup, just so we double check that for you too: OpenBuildsCONTROL > Connected to the machine as usual > Grbl...
A recheck (or redo) of the X wiring would be best then, an intermittent issue indicates the order is correct, but maybe somewhere a terminal is...
is what it sounds like (:
That's the key thing to mention :) If it hit the switch, it's a valid Hard Limits (it did hit the switch) If it was nowhere near a switch it would...
But here's another I did find Headless interface · Issue #717 · grbl/grbl That does check while(RxString.lastIndexOf('ok') <= 0) { .......
I edited my post (guess not before you saw it) and removed the link - it doesn't actually do queue management it seems (from the code, nothing...
Remembered to unplug BlackBox USB cable to switch it to AUX mode?
