Separate names with a comma.
Some features disabled for guests. Register Today.
Grbl Panel is not a maintained application anymore - last worked on in 2018. See Releases ยท gerritv/Grbl-Panel Consider something more up to date...
Not sure what that means. But reconsider my advice in post #9 above.
Use the version referenced in the Wiki
Yes see that's not typical around these parts and adds a point of failure into your setup. Consider a different plug/socket that is not so easily...
See above ^
Version 9.5 is quite old, your are on v9.510 (from Oct 2018). See Program Updates | Vectric The installable Post files works with Vectric 10.x...
Yes, I got that... but drill down deeper, what is moving. Is the wheels tight on the extrusion (all wheels?) Is the ends of the extrusion tight...
Take a screenshot of your Aspire > Help > About window please Also your Post Processors would not be on the DESKTOP: See Where do I look to find...
Any chance the Plates have the hole spacing wrong? Or extrusions out of spec (slot wider than it should be, stretched too hard during extrusion...
Eccentrics properly adjusted? That's how you bring the wheels in to adjust their spacing in relation to the rail. Did you install eccentrics as...
Ooznest is an official OpenBuilds distributor, so it should be our wheels they stock.
Correct, please use the included USB cable for best performance.
See the Software section of docs.openbuilds.com for more suggestions
yes as mentioned, some CAMs do. OpenBuildsCAM is a beginner CAM, it doesn't do helical ramping only straight line ramping
Almost all CAMs has a function for this, typically called "Ramping"
The coolant cools the Spindle motor windings, not the bit.
Checkout docs:blackbox:faq-emi [OpenBuilds Documentation] for our comprehensive FAQ on EMI, also make sure you didn't forget step 4.2 of the...
Most common issues are assembly related (loose wheels, loose fasteners, loose leadscrew couplers, loose stop collars not tight up against the...
Double check all fasteners too
Changing the wheels: Delrin wheels does not flex that much - I'd start by checking V-Wheel adjustment (eccentrics). Also as you grip the endmill...
