Separate names with a comma.
Some features disabled for guests. Register Today.
Openbuilds CAM is a entry level, free, CAM to get you started. But our hope is as you progress up the skill ladder you also graduate to learning...
Also see docs.Openbuilds.com > software section has details regarding our Post Processor. But yes, trial does not allow Post Processing / GCODE...
So what are you using now? Include the file? Did you remember to HOME prior to setting Zero? (Advanced CAMs move in Machine Coordinates too)
Missing listeners for the touchup / mouseup events? Button down starts the jog, button up stops the jog. See...
Cleanup your setIntervals with clearInterval when you close the dialog / stop the macro. You are spawning multiple instances of that loop (each...
CRV files are for Vectric, not OpenBuilds CAM
Macros are loaded after "the document is ready" so no need. Up to you. In a setInterval if its something that happens on a loop. After a button...
Google for "ubuntu usb selective suspend" it is active by default. We provide instructions for Windows under section 4.2 of...
Transform tool in toolbar on the left, or fix it in CAD
Defaults are good for a test
OpenBuildsCONTROL > Connect > Go to Grbl Settings tab > select from profiles (nearest similar machine) > scroll down and fix any values that need...
In your CAD/CAM, move the drawing closer to the origin
1) avoid the Pi, it is too slow 2) use a Windows PC as a test, make sure to complete sections 4.1 and 4.2 of docs.openbuilds.com/blackbox 3)...
Checked grubscrews on shaft couplers between motor and leadscrew?
More likely Motor wiring (loose terminal, wiring break) causing motor to stop turning intermittendly. See docs:blackbox:faq-identify-motor-coils...
Checked tramming?
No, was just making sure it wasn't a 6mm DOC with a Surfacing bit (that would be a bit much)
Then yes, best leave it to the store team to resolve, they are back online Monday
Endmill ground 0.5mm over diameter? Caliper the endmill / cut a straight slot and measure the kerf - and use the exact value in your CAM setup.
You can either export the gcode and send it via CONTROL, or connect directly in Lightburn. See docs:software:overview [OpenBuilds Documentation]...
