Separate names with a comma.
Some features disabled for guests. Register Today.
What size of endmill was used for this cut? Also a surfacing bit? How many hours total do you have on the router yet? It might be worth checking...
Perhaps EMI corruption? See docs:blackbox:faq-emi [OpenBuilds Documentation]
Homing sets Machine Coordinates SetZero sets Work Coordinates Work coordinates are offsets from Machine Coordinates. Thus you home first to...
For this setup, control which device is powered up. Laser PSU on, and VFD off = laser mode. Laser PSU off, and VFD on = Spindle mode 0-10v is...
OK so from the pics, you have a Dust hose? Did you follow the section 2.4 on docs:blackbox:faq-emi [OpenBuilds Documentation] I can't see your...
If you run Fusion GCODE and other more advanced CAMs that also runs in G53, you need Machine Coordinates set too
We check for Idle/Door status before starting to jog: See OpenBuilds-CONTROL/jog.js at master ยท OpenBuilds/OpenBuilds-CONTROL for example Some...
Well that's not ideal, you want to be able to cut into the spoilboard (surfacing operations) and to the spoilboard for profile cuts Soft limits...
Can't home, but can "fake it": How to 'Fake the home' (Not recommended though - fit some Xtension Limit Switch Kit instead)
Agreed, we're much happier to answer questions all day long, compared to having to tell you the magic smoke is now gone (:
Never feel silly! Particularly that symptom - is hard to put one and one together because the motor still somewhat works. It does happen often...
Never ever change these advanced settings from the default! They are perfectly tuned by default. Should be $11=0.010 Junction deviation, mm...
It is plug and play. Something in your setup is weird though. Like I said above, tell us what you are running... What machine, where is it bought...
Rather get a beginner friendly and easy to use setup like a https://docs.openbuilds.com/blackbox - especially when things go wrong: you'll be...
Unfortunately we do not know your controller, please approach the vendor you purchased it from for advice. Or consider a BlackBox - plug and...
Sounds like EMI. See docs:blackbox:faq-emi [OpenBuilds Documentation] Its something (spindle, dust extraction, etc - tell us what you are...
Your button: Has the class of .xP as well. So when you click your button, you are sending an event down to also go click on all .xP buttons,...
Easier than reinstalling your OS ....
Red doesn't always mean something is wrong lol! Its just a color chosen to show "the response on the right relates to the command sent on the...
Not the issue, don't worry about it. It is shown in the log on connection
