Separate names with a comma.
Some features disabled for guests. Register Today.
We almost never close threads (unless they become unruly hehe) Machine coordinates aren't too hard to understand but yes, coming from 3D printing...
You can use dig to check where any DNS entry goes [ATTACH] mymachine.openbuilds.com is just localhost: (But has to be a proper DNS name for...
Websocket crash: Try after a reboot
Approx a foot extra left and front is plenty - but of course it depends on what you want to do. If you want to put a laptop down next to it, plan...
See: Ie that is already in your CAD file, that first segment it goes to, is the first segment in the SVG file as it parses from the top down
What size of endmill are you probing? Are you using OpenBuildsCONTROL? What version of CONTROL are you using? Are you sure you wired the Probe...
Consider getting the stitching under software control? If its how I imagine, a machine with a footpedal switch, you can use the relay:...
Sounds like your machine isn't set up properly yet. Calibration, acceleration, max rate etc. Could also be mechanical slippage in Z Refer the...
Correct Elaborate on "it didn't work" so we can advise
OpenBuilds CONTROL > probe > under probe type select Custom > click the Gear icon > Enter dimensions of the offsets in XY and the thickness in Z
Contact the store via Support for assistance.
If you want to use touchoff you also need to define your Probe Macro in SETTINGS. And enable Touchoff in the toolpath The DRO values just...
Images are not showing up. Use the UPLOAD A FILE button below the field where you enter the message to upload, then use the Insert buttons next to...
The technological limit on Diode lasers are around 5-6w. OptLasers has a true 15W using three diodes and collaminating lens setup PLH3D-15W...
The picture is not an OpenBuilds Probe (With classic I though you meant our old Z probe) We only ever sold the Z probe (round puck shape one) and...
Depends on what kind of laser you have? CO2 or Diode? Wattage? Air Assist or none?
