Separate names with a comma.
Some features disabled for guests. Register Today.
you will need a Z axis, even if very short, since you will need to adjust layer height. use a NEMA17 motor and 40x20 rail to make the Z and it...
I bought the z-axis upgrade for my acro From JTech Laser and now my z-axis motor is not working. I know it’s not my black box controller because...
Did you remember to click yes when prompted to flash the 2-axes firmware? If not, Grbl is trying to home Z first, there is no Z motor, thus the...
Giarc published a new build: Read more about this build...
why dont you do z axis on acro system need it for fixed focus lasers i know what parts you have to make that happen here is a pic parts from...
I'm filling a series of small bottles in series so I was thinking of having a z-axis be sub-floor so I could run something like a rail based tray...
Well, if you read this: (follow the link, go actually read the wiki attentively) You'd understand why is clearly not related - and rather...
Thanks for that Would the best way to fix this be to re set up the firmware on control and customise it to my machine using the acro preset If I...
You'd need to design a Z axis for the knife to fit on an Acro.
The laser engraver you saw in the picture I got from BangGood 1 1/2 years ago. I had to modify the gantry's that came with it - making the holes...
Odd indeed as Limits are handled by Firmware not the host application. Double check it still works under CONTROL? Confirm X and Y isn't swopped...
It suggests you install it, but the window does have a No Thank you button too (;
Hi WildBill, I'm building a laser engraver using the Acro project but trying to make it as chap as possible, so I'm going to regular aluminium...
Hello from Canary Islands Sorry I'm so "rookie" in this world but here is my questions... I just bought the Acro 1510 system and I still have...
The command for the Z would be the same for the other axis. If your Z was at 10, then you would have to command the Z to go -10mm to get it to...
1) invert your selection (deselects what is selected, and selects everything else) 2) read the entire Grbl wiki at github.com/gnea/grbl/wiki it...
The ACRO is a system designed for use with a laser. You might get away with using a Dremel on the smallest model ACRO but the system lacks a...
Enable Laser Mode gnea/grbl Flash the 2 Axes firmware from CONTROL (If you select Acro, it asks you do to so, or you can manually do so from...
Not really no. You are cutting at 1000mm/min by having F1000 with 100% power. S1000 matched your $30=1000 to be 100%. S500 would be 50% for...
I have finally got a chance to replace my old xPro V3 with a brand new V4 w/Spak Concepts box. The board pretty much works right out of the box...
