Separate names with a comma.
Some features disabled for guests. Register Today.
In the stock Acro configuration, there is no motorised Z axis, We did however not yet need it - a couple extra passes on usually does the same....
I think that if you want to use the ox side plates, and you want something that can handle the torque of a router/spindle, you should have built...
I ordered the ACRO system with CNC xPro board. I am planning to build a two-in-one machine - a 3D printer and an engraver. I'll use the stepper...
I would do it that way (unless your build differs drastically) Yes, but make sure to flash the 2Axes version from the Flashing tool (or when you...
I am pretty sure I did when I chose the acro setup. When I first tested, I was using 3 axis an three switches and I depressed the z first. I...
CONTROL is just a gcode sender. But OpenBuilds CAM at OpenBuilds CAM Gcode Creator - Public Beta does have multiple passes, but as the default...
I just mirrored how the motors on the acro were connected. I’ll have to research The wires on this z-axis stepper motor. Is there any literature...
While I like the idea of having an adjustable Z-axis I am not sure that the 2040 beam can take the torque, and I am sure I would not put a router...
Did you even flash the Acro / 2 axes version at some point. Why? The flashing tool should work, so not sure what's different about yours. I see...
This is awesome! I'm also building ACRO to cut model airplane parts as well! I'm planning to use mostly 1/8 and 3/32 balsa and 1/64 ply and 1/8...
I'd advise against it: People forget the weight of the Plasma cutter hose/cable coming off the torch. It weighs a lot and will crack the acrylic...
Don't - the Acro system is a lightweight design suitable for plotters, lasers. It cannot take the heavier Z axis (doesn't come with one - you...
I am expanding my shop and will now have 2 Acro based machines that I want to run from a single install of OpenBuilds Control and Lightburn. One...
The XYZ linear system is equipped with 4 stepper motors. With the robust v-Slot profiles from OpenBuilds, the machine is ideally equipped for...
Hi, I want to make machine with 1000x1000 mm vertical load with z-x axis. I initially tried with acro 1000x1000 with nema 17 but slippage was...
Thank you, I did that. The solutions are not something I want to have to work on, I would rather have a bolt on option. I saw cutting rails,...
Acro 1515 with additional Extrusion frame to allow overhead rigging support. Upgraded 2.2amp Nema 17 Motors for X & Y Nema 17 Linear Z-Axis with...
I have installed OpenBuildsFusion360PostGrbl.cps per the instructions and Fusion now produces a .gcode file that OpenBuilds Control will load and...
It's not an Acro, but I did use that as a starting place. Long story short - machine was originally an OxMetal (modified Ox with lead screws),...
On boot up early in the video you can see Grbl-Alarm top right. Your BlackBox is alarmed before we even connect to it It won't accept jogs while...
