Separate names with a comma.
Some features disabled for guests. Register Today.
Pretty standard thing to do. Set origin in your CAM to bottom of material. The CAM knows how thick your stock is.
Run first file. When it's finished, swop tool, rezero Z, and run the second file. Rezeroing can be manual, or with the probe If you are removing...
Make sure to chronologically follow all steps in the Interface documentation, https://docs.openbuilds.com/interface - skipping some steps can lead...
Will check your file in office hours, but, did you use a 100% Grbl compatible post processor?
We can load files over 1 million lines, so unlikely to be the case
May just be resonance at the lower speeds. But do try some dry PTFE (never oil) lubricant on the leadscrews
CONTROL > Grbl Settings > Scroll down to $30 Max RPM and enter 1000 in the field to the right of the description. Click SAVE on the toolbar at the...
Please follow the onscreen instructions. At step 5 its waiting for you to Insert a USB drive. Step 6 will have you remove the drive. Step 7 will...
I need a 32A breaker for my 40A plasma and 150L compressor, because if the compressor kicks in while cutting, it trips a regular 25A breaker....
Thank you for the kind words! Will pass it on to the team to share during the next morning meeting! Very happy that you are sorted!
Before running jobs you really should have done a shakedown of bits as and when you added them (; In CONTROL > Tool On menu - Does that ignite...
Disconnect that - then try again (Emergency stops should hard cut power - a software based feedhold will do nothing in a real emergency - except...
Have you got anything connected to the Door input? docs:blackbox:connect-door-sensor [OpenBuilds Documentation] (That is also the FEEDHOLD input)
Looks good! Perfect
Ok, so VI then where I wrote ACM VFD namings are confusing
I got it from your diagram. If ACM = GND it doesnt belong on the switch at all! Should be whatever the VFD terminal is that the 0-10v goes into,...
The old xpro issue related to some versions needing $4=0 and some needed $4=1. Wrong setting would not move at all.
