Separate names with a comma.
Some features disabled for guests. Register Today.
Gnd to Gnd V+ to 5v SIG to rhe the relevant endstop input
Include the other two steps too: Cleanup the install location (the path is shown during the install) and also reboot before installing. Windows...
Uninstall the old corrupted install, cleanup the install location. Reboot. Then install from fresh :)
Not recommended, but see docs:blackbox:jumper-slaveaxis [OpenBuilds Documentation] - last paragraph
Stalling relates to motor specs, Inductance and Coil Voltage not being ideally matched?
Or use the dedicated COOLANT output: similar to docs:blackbox:connect-coolant [OpenBuilds Documentation] but instead of a vacuum, plug in the...
Great Build! If I may offer one comment that could possibly be an improvement: From this photo angle it looks like cut-debris (hot sparks, gasses,...
Will be fixed when CONTROL v3.0.312 is released later today, thanks for the report
Perfect!
Only if their electrical specs are outside acceptable ranges. You want 3-6v coils, low inductance, 2.8-3A current rating. Compare to our motors'...
Yes: And
If you have a couple minutes for a test, dial the current down, blow some air on the controller (desk fan will do) and see if it sounds different
Oh, and do replace your limit switches with our Xtension Limit Switch Kit Onboard EMI/switch debounce filtering is another game changer for...
Will be fine (:
Read the DRV8825 design notes from TI, about the PowerPad thermal spec. Heatsinks out the bottom though a soldered pad underneath the chip. A...
The drivers on them can cut in and out several times per second during overheating causing a similar audible symptom - put a fan on it and dial...
In the browser, open Devtools > console and refresh the CAM page - might see some clue as to why the ajax request to...
DC gnd to Earth leakage via the new monitor? Disconnect as a test
1) Did you allow CONTROL through the Windows Firewall 2) make sure you are on the latest version of CONTROL 3) Make sure your computer can do...
We don't have canned responses. We do have documentation for frequently encountered issues, and you will only ever be referred to that if it...
