Separate names with a comma.
Some features disabled for guests. Register Today.
It is how specifically Open source you want your Build to be (applies more to Builds of your own making, own designs)
The edges are quite useful as a positive stop for aligning workpieces properly, otherwise two options - Add a 1/4" thick sheet the exact working...
Extending is an unlikely prospect, try replacing it with one of our motors
The author of this design has not uploaded all the files. Some people elect not too (not entirely the intention of the Builds system, but it is a...
Ok, and you are on latest CONTROL too? Both CONTROL and Interface use exactly the same jog methodology (Max rate in Grbl Settings x percentage set...
Are you on the latest firmware? (v1. 51) Regarding the LEDs please do contact the store via Support for a replacement
Yes, the 2-axes firmware only homes X and Y as its meant for a 2-axes machine. If you have a Z axis, you need the 3-axes firmware (Z, then XY homing)
Intermittend motor issue could also be a break inside a cable under the insulation (at a stress point, bending back and forth - can break wires...
Line 4 of your Gcode, Z127 - that's quite high you're raising up for a safe height - just to machine a grid pattern, so also check your CAM setups...
Did this have any effect on your Z jog direction? If so, did you Invert Z Direction? Did you do so by changing motor wiring (reversed coil order)...
Scaling usually relates to the DPI you export at. See OpenBuilds-CAM/svgparser.js at master ยท OpenBuilds/OpenBuilds-CAM Most applications default...
And... That's how Autodesk is stealing the market!
One would expect for Solidworks's pricetag they should help with posts for something as popular as Grbl - betting there are far more Grbl users in...
If the OP wants to get into it, surely Solidworks has some documentation on how to edit their post processors? Take the almost working one, and...
Thus - also remember: Be sure to use the actual endmill diameter in your CAM too to ensure the compensation (called the OFFSET) is correct - if...
On the PC side we do a lot more processing of known non-grbl mistakes. On Interface we don't have the resources to preprocess large files just...
Oh and those start/end of tape markers from 1970s has to go too, not supported by Grbl either. This really doesn't look like Grbl compatible post...
Here's how'd have set it up. 3mm deep dados, 9mm deep pockets for score towers, 18.5mm stock thickness for cutout and through pockets. Workspace...
OpenBuildsCAM chokes on your start-end depth values Cut depth = distance below zero to stop cutting (you set it to 9) Advanced: Cut depth Start =...
Have you tried deleting bracket-ed comments? Grbl prefers semicolons
