Separate names with a comma.
Some features disabled for guests. Register Today.
Well we know it doesn't disappear for regular Grbl uses, the only difference here the Mega version of Grbl (Gnea or 3rd party by the way?) - could...
Wood should be fine, just make sure to properly ventilate to prevent overheating If you have a source of EMI - it makes more sense to address the...
Make sure your Mega fork of Grbl reports position feedback the same way Grbl was. That gets parsed to show the cone
Try the Hello World as a good first project docs:blackbox:hello-world [OpenBuilds Documentation]
Did you remember to click yes when prompted to flash the 2-axes firmware? If not, Grbl is trying to home Z first, there is no Z motor, thus the...
Post the file please
Yes, then proceed to tune Acceleration and then Max Rate You have to do steps-per-mm first as the other values depend on that. Acceleration is...
Well, do calibrate first, if your off by half the distance, your speed is half of commanded as well (for example) or you could be stalling more...
Yes, that's a bit old. V1.43 dates back to Jan 18th 2021 (almost a year ago): See History for interface - OpenBuilds/firmware You should be on...
You should not change calibration - to change speeds. Jog speed relates to Max Rate: See Grbl v1.1 Configuration ยท gnea/grbl Wiki You may need...
Operator error. Probe sets Zero. You went it set again. Don't do that. The probe already did. See docs:xyzprobe:assemblyvideo [OpenBuilds...
Is your Interface Firmware up to date? See docs:interface:firmware-update [OpenBuilds Documentation] There was a serial queue (CR/LF) bug that's...
You can find a couple in the Resources | OpenBuilds and also see Search Results for Query: clamp | OpenBuilds and Search Results for Query: hold...
Set $5 back to 0 please
According to that screenshot, Homing is already enabled. But your switches did not clear when Grbl tried moving off them.
Order yourself some better switches: Xtension Limit Switch Kit Low quality switches "bounce" and those are garbage that also doesn't last.
You have to add a switch to direct the PWM signal between the relevant tools (Grbl only has one PWM output) See docs:blackbox:iot-and-laser...
No! It's not what he was referring to. We both notice that your X and Y is going the wrong way (because of incorrect wiring, or value of $3 -...
Lots of folks build it reversed, you are welcome to.
Any chance you accidentally thought the Dataloggers IoT relay is a power strip and plugged the 24v psu into that, instead of the wall? Only the...
