Separate names with a comma.
Some features disabled for guests. Register Today.
Then that's all good and working If you need the screw driver to hear the noise, you are obsessing over nothing. Stepper motors are controlled...
No! Grbl uses S for everything. Don't change those backend configs please - not relative to you (only for people using other...
Post detailed pics of your wiring and we'd be happy to check it for you
If its a rattling sound (not a smooth hum): See See docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation] For nema17s current...
You can extract dimensions from our standard Plates: OpenBuilds | 3D Warehouse For example: OpenBuilds Mini V Wheel Plate_1_0 | 3D Warehouse is...
The changelog shows all the entries so you can see even prior to an update, what's new in the incoming update (:
Agreed with @sharmstr I ran your file through 1.0.309 (bug was in 1.0.308 only and it was only out for 19 hours before the bug was caught, fixed...
@BruceA and @Aeneas - please update to v1.0.309 to resolve Also available from Release v1.0.309 · OpenBuilds/OpenBuilds-CONTROL Let me know if...
I've pulled the latest update for now while we investigate - that may be a bug. Please reinstall v1.0.305: Release 1.0.305 ·...
Did you wipe your Grbl settings by playing around in either application? Restore your last Grbl settings backup.
Could be either one of the following: docs:blackbox:currentadjustment [OpenBuilds Documentation] Grbl v1.1 Configuration · gnea/grbl Wiki...
Then there is still remnants stuck (running instance? Reboot) that you didn't clean up
Video below is a worthy watch, and don't forget that ANY cable could be the antenna - we've seen a case where a guy had a spare USB cable hanging...
Uninstall and cleanup the old install first - sometimes the uninstaller get stuck if your computer lost a couple temp YAML files since the install...
@sharmstr @David the swarfer @Alex Chambers @Aeneas New in v1.0.308: Added a little button top, left of the DRO. Shows current WCS. Clicking it...
Glad you are sorted! Thanks for the compliments - passed it on to for you so they can let the teams know (:
You probe XY with a dowel pin or other perfectly round endmill (not v, ball, taper, etc) - ideally one that matches available endmill diameters...
v1.0.306 is available - give that a test by probing in G55-59 and see if that works?
There are multiple coordinate systems G53 = Machine Coordinates = set by homing G54-G59.1 = Work Coordinates = set by probing and zeroing Fusion...
Valid point, I'll change that to "current WCS" instead of forcing G54 in an update later - would make things a lot easier EDIT: Github issue...
