Separate names with a comma.
Some features disabled for guests. Register Today.
Not in CONTROL. In CAM. Gcode is generated by CAMs. Thus, what you want GCODE to do during a Job, will almost always be something you set up...
Go to Grbl Settings and enter a proper value for your Z axis acceleration. Click Save
Probe moves: Probing macro is set up in Settings tab > Settings button > Advanced section: You have to write your own Gcode sequece here, using...
Aha! What keen pair of eyes. I thank you for spotting what I missed. But yes, that is very possibly it!
Providing Linux tech support to the average user with little to no Linux experience. The Pi is supported, but we don't provide "technical support"...
Good catch, getting in there poking/looking/moving/touching for inspection is always the best way to find what's getting stuck
Wiring is always fine, until it isn't anymore (borrowing this quote from someone on the forum here, cannot find it right away to give credit, but...
Check the Serial log for clues when it stops (like false hard limits triggers) and listen to the machine itself for any noises like it's jamming.
Do you have Soft Limits enabled in Grbl Settings?
Most likely wiring. Either you forgot to reverse the coil order on the 2nd motor, or the terminals are improperly installed and only 3 of the 4...
Check switch wiring. Use the Troubleshooting tab in CONTROL to test your switches. Make sure they all respond, and that the correct axis responds...
Just mount a pen to the Z axis (:
Ok, contact the Partstore via Support for further assistance. Thanks
Settings configures the overall operation. When you set up Toolpaths you enter the parameters for the cut as material thicknesses etc differ...
I am not seeing the Z move in the log.
They are, but your symptoms so far doesn't ring hardware replacement just yet Do post the log for another set of eyes on it Thanks for...
Does the Z axis fault LED light up Point (F) of docs:blackbox:layout [OpenBuilds Documentation] and then refer to docs:blackbox:currentadjustment...
Sketchup Make is the "free" version and the one you want: Sketchup Make 2017 (Last free version) Google sold Sketchup out to Trimble years ago
Halfway / 50% is factory default. That gives you approx 2.3A - good setting for our motors that won't overheat
Definitely EMI: see docs:blackbox:faq-emi [OpenBuilds Documentation] I'd start with the Dust hose section of the FAQ page, very likely cause here
