Separate names with a comma.
Some features disabled for guests. Register Today.
OpenBuildsCONTROL has a tool speed override slider too, if you do connect the VFD, you still have RPM override available mid-job for dialing in...
Well, when you get it there is a bit of time that passed since the factory assembled it, so yes, as per docs:interface:firmware-update [OpenBuilds...
Yes, Wifi is just used for firmware updates (So if you elect to not be connected, PLEASE remember to manually update firmware regularly,...
It effectively replaces the laptop yes. You copy GCODE files onto a USB drive. See https://docs.openbuilds.com/interface for all the info Section...
No, that will cause the corners to burn. Please read: Grbl v1.1 Laser Mode · gnea/grbl Wiki as mentioned a lot earlier in this thread: If you...
Get well soon!
I asked what CAM application you were using, right: To which you said: Thus my advice on how to set it up in OpenBuildsCAM. But now Your...
Also check into Issues · bdring/Grbl_Esp32 for that specific Grbl fork (onwards renamed to fluidnc - as they move further and further away from...
Thanks for the suggestions, will keep them in mind. Some have hardware capability limitations that can't easily be overcome but all feedback is...
So in Settings > Settings > under Toolhead, make sure you have the Dynamic laser (M4) option
You can absolutely run manually if that's fine with you. Just a matter of convenience (:
See section 7 of Terms of Service and Rules | OpenBuilds
docs:blackbox:connect-vfd [OpenBuilds Documentation]
Noted, but the deceleration i am referring to = firmware Probe interrupt triggers, maybe (just a wild theory) Grbl's code takes a couple more...
Check your control wiring first. They are quite bulletproof, more likely a wiring issue. Loose terminal, or the like
Ahh i see it there yes. Nope, got me stumped (: Guess attempt 1: after hitting the probe, Grbl decelerated for a little bit before coming to a...
Measured or according to the DRO?
Your CAM has to add that to the header. What laser CAM are you using?
Tip: The Backup Grbl Settings button on the toolbar of that window makes for an easier to read and access text file (:
Contact the Partstore at Support and they will be happy to get a replacement out to you
