Separate names with a comma.
Some features disabled for guests. Register Today.
This page The page we referred you to for your issue, linked as well, to which you replied that you did identify the coil pairs (note the FAQ...
I see only 2 axes, so you are running the 2 axis firmware not stock Grbl. In which case you have X and Y seperate. Custom recompile then if you...
Reread the FAQ page, it covers more than just wiring order.
Probably not running stock Grbl already, flashed any 3rd party hex files?
Wiring: that is a classic symptom. See the symptoms in section 1: docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation] Edit, sorry...
Grbl already homes Z first, then X and Y together. The word Optional there is just documentation wise. If its uncommented, its active
Right, so it was an alarm, caused by a limit switch that triggered. Did it hit a switch at the time? If not, that would be a False Hard Limit -...
The alarm would have shown more info, particularly the ALARM that caused the lock Rather screenshot, or note down complete messages so we can help...
Which CAM are you using?
Probably also wiring, or if you wired it to the Coolant control, remember to turn it on from the Tool On menu
The database numbers are very Conservative anyway. It would not hurt basing your own items on the nearest similar bits, then do spend the time...
Basically yes. The button you press just closes two wires together. The relay in the BlackBox, does exactly that for you
See docs:blackbox:iot-and-laser [OpenBuilds Documentation]
Open ended belt, available per-foot: GT2-2M Timing Belt - By the Foot or 3GT (GT2-3M) Timing Belt - By the Foot Also available in Bulk spools...
If its an advanced, custom homing sequence you are after, you'll have to compile yourself But if its one of the more standard, popular things, we...
Use our switches (: Xtension Limit Switch Kit See docs:blackbox:connect-xtension-limit [OpenBuilds Documentation] Our official switches are just...
Jog machine far left, zero, then jog to just before crashing into the other end. Note number in DRO. Repeat for other axis. If its for CAM...
Yes, see the note below the picture on
Also see How to calculate V-Slot® deflection Pinion style belt / rack may be too much inertia for a laser - ideally you want to motors mounted to...
Actual cuttable area Get some Xtension switches Xtension Limit Switch Kit and follow the docs: docs:blackbox:connect-xtension-limit [OpenBuilds...
