Welcome to Our Community

Some features disabled for guests. Register Today.

Sign Up

Search Results

Search Again
Page 9 of 10
  1. Peter Van Der Walt
    Post

    Advise wanted on converting a none Openbuild CNC.

    You can run 1.7A -> 3.2A motors with BlackBox: See docs:blackbox:currentadjustment [OpenBuilds Documentation] They won't fit our standard plates...
    Post by: Peter Van Der Walt, Nov 2, 2021 in forum: CNC Mills/Routers
  2. Peter Van Der Walt
    Post

    Router for C Beam Machine

    It is available, just momentarily sold out :) Contact the store for estimated arrival dates of new stock: Support shouldn't be long at all!
    Post by: Peter Van Der Walt, Nov 2, 2021 in forum: CNC Mills/Routers
  3. Peter Van Der Walt
    Post

    Touch Probe shorted Blackbox, Firmware Error

    If you followed the FAQ link from the error, and that did not resolve the connection issue, the BlackBox is indeed dead. Agreed with David, do...
    Post by: Peter Van Der Walt, Nov 2, 2021 in forum: Controller Boards
  4. Peter Van Der Walt
    Post

    XYZ Probe Plus with VFDs and other ground-loop inducing components

    Probe wired wrong? Use the Troubleshooting tab in CONTROL to test
    Post by: Peter Van Der Walt, Nov 2, 2021 in forum: General Talk
  5. Peter Van Der Walt
    Post

    Advise wanted on converting a none Openbuild CNC.

    Checkout How to calculate V-Slot® deflection - or base your redesign on our proven machines: OPENBUILDS MACHINES | OpenBuilds (or even sell off...
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: CNC Mills/Routers
  6. Peter Van Der Walt
    Post

    Touch Probe shorted Blackbox, Firmware Error

    Usually a couple minutes, check your spam folder I would advise ordering a replacement if you are in a hurry, probably permanent damage from a...
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: Controller Boards
  7. Peter Van Der Walt
    Post

    Touch Probe shorted Blackbox, Firmware Error

    The support team will respond (or possibly already have) to you for further assistance. See docs:blackbox:faq-usb-connection-failed [OpenBuilds...
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: Controller Boards
  8. Peter Van Der Walt
    Post

    DIY probe using OB Interface

    We can only automate endmill diameter with our macro, and our Probe (: Get yourself a XYZ Touch Probe Plus for maximum compatibility
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: Interfaces
  9. Peter Van Der Walt
    Post

    DIY probe using OB Interface

    Correct, you can edit the probing macros after copying the defaults to your Flashdrive. Open them as text files and edit in your offsets manually....
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: Interfaces
  10. Peter Van Der Walt
    Post

    Sliding Desktop Hanging weight concerns?

    Checkout How to calculate V-Slot® deflection
    Post by: Peter Van Der Walt, Nov 1, 2021 in forum: Concepts and Ideas
  11. Peter Van Der Walt
    Post

    Z axis jog and home all.

    http://support.openbuilds.com/support/home will be happy to provide further assistance
    Post by: Peter Van Der Walt, Oct 31, 2021 in forum: General Talk
  12. Peter Van Der Walt
    Post

    Z axis jog and home all.

    Use the FAQ page to actually measure and check your Coil wiring: docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation]. - do exactly...
    Post by: Peter Van Der Walt, Oct 31, 2021 in forum: General Talk
  13. Peter Van Der Walt
    Post

    Meanwell Power Supply Cycling On/Off

    Replacement PSUs can be ordered from 24V Meanwell Power Supply Bundle Original owner probably damaged it earlier in its life, they are very...
    Post by: Peter Van Der Walt, Oct 31, 2021 in forum: General Electronics
  14. Peter Van Der Walt
    Post

    OpenBuilds LEAD CNC Machine 1515 (60" x 60")

    Ok, contact the store via Support for further assistance
    Post by: Peter Van Der Walt, Oct 30, 2021 in forum: CNC Mills/Routers
  15. Peter Van Der Walt
    Post

    OpenBuilds LEAD CNC Machine 1515 (60" x 60")

    Thus indicating wiring: see docs:blackbox:faq-identify-motor-coils [OpenBuilds Documentation]
    Post by: Peter Van Der Walt, Oct 30, 2021 in forum: CNC Mills/Routers
  16. Peter Van Der Walt
    Post

    So I appear to be missing something

    Then no need for more earthing, so far (:
    Post by: Peter Van Der Walt, Oct 30, 2021 in forum: Control Software
  17. Peter Van Der Walt
    Post

    INTERFACE CNC Touch Controller

    Also make sure you are on firmware v1.47: docs:interface:firmware-update [OpenBuilds Documentation] just in case, but Soft Limits can be ON, it...
    Post by: Peter Van Der Walt, Oct 29, 2021 in forum: Other Builds
  18. Peter Van Der Walt
    Post

    INTERFACE CNC Touch Controller

    1) incremental jogging is not supported, Continuous is quite easy to use - for smaller (slower) positioning use the Jog Speed buttons 2) Error 15...
    Post by: Peter Van Der Walt, Oct 29, 2021 in forum: Other Builds
  19. Peter Van Der Walt
    Post

    Shifting Origin at new Layer Depth

    You looked at the wrong page, the Fusion post is CPS. See docs:software:vectric [OpenBuilds Documentation] for the Vectric posts That is very...
    Post by: Peter Van Der Walt, Oct 29, 2021 in forum: General Talk
  20. Peter Van Der Walt
    Post

    Shifting Origin at new Layer Depth

    Incorrect. BlackBox drivers enter protection mode on an overheat event and stays in that mode until power cycled: docs:blackbox:currentadjustment...
    Post by: Peter Van Der Walt, Oct 29, 2021 in forum: General Talk
Showing results 161 to 180 of 198 Next >
Search Again
Page 9 of 10
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Accept Learn More...
    Dismiss Notice