Separate names with a comma.
Some features disabled for guests. Register Today.
The jumper removal just stop the relay chattering. Unrelated to the actual laser circuit, its just to prevent the relay wearing out when you use...
Its saved to the controller, not a file. Read the Grbl wiki first :) you can take backups using the Backup Settings button, but thats just what...
Error 31 = EMI: See docs:blackbox:faq-emi [OpenBuilds Documentation]
You can use the WORKBEE1010 profile, the "laser profile" just sets Laser Mode to Enabled for you (and has a little higher acceleration and...
Yip. Connect over USB then head to the Grbl settings tab Also read github.com/gnea/grbl/wiki
By recompiling grbl: see the comment in config.h about changing homing order
Speak to http://support.openbuilds.com/support/home and they will give you some more advice (:
Check your motor specs, most motors are 1.8deg (regardless of size) but its not a given of course, some are 0.9deg (400 full steps)
Motor physical steps = 200 (for standard 1.8deg motors) Microsteps set to 1/8th for example: 200 * 8 = 1600 microsteps per rotation. Leadscrew...
High voltage HF start type? Propely earthed to an earth spike as per its manual?
Good stuff, they always sort people out right away. If you do find anything, its just to prevent killing a second one though (; so do check...
Check the 4 pin cable, maybe yanked on it a little hard, thus unseating one of the pins from the housing on one of the ends Also make sure your...
Consider the " CNC Electronics bundle" - everything you need in one store item: - see CNC Electronics Bundle with NEMA23s, or if budget allows,...
Make sure you submit via the "Submit new ticket" link on Support and also Check your spam folder (might already have a reply in there) Wiring...
The picture looks like something mechanical. Loose wheel, loose stop collar, loose shaft coupler, etc
As long as its mounted so Z homes toward the top, everything else is up to you. Mount it wherever you can/want to Use Troubleshooting tab in...
Do still note my older reply though, regardless of the USB setting (good to have it Disabled, but still) :
Yip, they think they know better (; Now "home" is in a non-standard location. Flash stock Grbl onto it. Read gnea/grbl to understand why...
Yes, but did they flash stock Grbl (from Releases ยท gnea/grbl), or a custom build of Grbl. Some clever folks think they know better than the main...
Read the manual. Covered in section 4.2 of the BlackBox documentation: docs:blackbox:install-windows-selective-suspend [OpenBuilds Documentation]...
