Separate names with a comma.
Some features disabled for guests. Register Today.
Were you using it on the bit or collet. It sticks very well to the flat on the collet. Crocodile clips are dangerous (more so than the magnet) in...
Negative, impossible we would never do that. Only YOU can flash firmware from wizards and tools, or save Grbl settings from the Grbl settings tab...
Wizards and Tools > Calibration yes
Yes, see Search Results for Query: Blackbox co2 laser | OpenBuilds
The dropdowns just populate the forms below with defaults for our Machines. Scroll past and set up what your machine needs
M4 = Dynamic Laser in Grbl laser Mode: see gnea/grbl thus perfectly correct
Would be easier to answer if you include some examples, screenshots and source files
Accelerate as fast as possible, without stalling. Trial and error
Check if its speed related (stalling because you set acceleration and max rate too high) first
Sounds like you have some EEPROM corruption. See gnea/grbl Also try a reflash from Wizards and Tools > Grbl Flashing tool
That alarm only occurs if you have Homing enabled [ATTACH]
Is the fan in the BlackBox spinning? All it needs to move motors is 1) $4=1 2) 24v in, on and working (fan is on 24v too, so quick way to check)...
Check that you have $4=1
Checkout post #22 in OpenBuilds LEAD CNC Machine 1515 (60" x 60") At 1000mm though, you may see some wobble: You can refer to How to calculate...
Sure, if you do find more info or a bug, happy to help. Checkout the Troubleshooting tab > application diagnostics too for some tests like...
Try after a fresh reboot, look for other applications that can cause conflicts, and make sure all chipset and graphics drivers are up to date....
Read (the entire) Grbl wiki at github.com/gnea/grbl/wiki
