Separate names with a comma.
Some features disabled for guests. Register Today.
Of course, thats the point of the discussion prior to tagging you in ^. Just the Z Machine coordinates we are talking about...
Figured, so they maybe have posts to work around the non-standardness - but yeah, that leaves you manually editing for all other CAMs where a Duet...
@Alex Chambers wasnt there a way to fix the machine coordinates back to how the rest of the world expects them to be?
That is not only nonstandard, but also incorrect, incompatible with most CAMs (and dangerous). Despite the difference in firmware, the Grbl...
Now that we lost David (; best you'll have access to, is his git history OpenBuilds/OpenBuilds-Fusion360-Postprocessor
Control 1.0.303 will be out soon (today or tomorrow) Use it to re-prepare your Flashdrive as per docs:interface:prepare-usb-drive [OpenBuilds...
Gents, if you want to continue the "which leadscrew did I pick" conversation may i suggest you move it outside the BlackBox support thread. We are...
G28 = user settable parking position. Its not going to machine zero. Its going to G28 which is coincidentally at last homed spot because its not...
Paste the snippet from an end of gcode file please - depends largely on which CAM, which Post, etc was used. Suspect you have Fusion, the wrong...
Checkout gnea/grbl Home is not where the switches are: its at the back, right and top After homing in your video at about 00:45 when you say "at...
Torque resists stalling at low RPM - You really need a torque curve graph over the range of RPMs to make any real calls on that characteristic For...
If you have Xtension limits, then yes, V+ on BlackBox to V+ on first switch to V+ on second switch GND on BlackBox to GND on first switch to GND...
Factory default is perfect for almost everyone. Halfway up the scale. Dial in a little more if needed. Its hit all the way VREF is 'old...
If you have High Inductance motors they will self stall. Dial back Max Rate and Acceleration in Grbl Settings to suit the motors, or replace with...
IN Should be wired to 5V (always on) or through a panel potentiometer (realtime override)... Putting 10v into a 5v max input could have killed it...
Inside the application. Where you loaded your machine profile when you first set it up... Run CONTROL, Open it. With the application open, connect...
OpenBuildsCONTROL > Grbl Settings > Backup Settings :) Thanks, investigating a possible bug: Does it also happen for X-only probes?
Rereading the issue, but if it really moved the opposite direction, you could also have a bad connection on the motor for that axis: See...
Already answered above: Theoretically yes (pinouts is labelled on board) , but, as also mentioned before, rather speak to...
Use the mouse then, same shortcuts as in CAD. Right button-drag = pan Middle button-drag = orbit Mousewheel = zoom Reset View button = recenter
