Separate names with a comma.
Some features disabled for guests. Register Today.
You could use it to autolevel fairly easily. put the nozzle in a predetermined location, and drive the bed up to it.... would be sync nightmares...
I did shank the measurement though. Looks like if I want dual extrusion I will have to go bowden. I not completely sure I will acually be able...
[ATTACH] The Zen Toolworks lead screws are turned down to 5mm from the TR8*8 20mm on both ends. Its pretty simple mounting, the leadscrew sits in...
Gt2 belt, pictured is the open ended belt for the core xy I used to measure. Came out to 1870mm which of course sdp-di was out of stock. Two,...
adamcooks published a new build: Based on the work of Carl Feniak and his C-Bot. A robust Core XY style 3D printer that has a clean parallel...
[ATTACH] [ATTACH] [ATTACH] Last part just ordered from sdp-si. Just a mock up, i need to rent a miter saw and a weekend with no snow to use it.
I have been really in the hot end rabbit hole. Some more quoting of Jetguy. >You guys are endlessly chasing down a nozzle problem when the jam...
I figured I would break one or two, and got five. I didnt see, or it wasn't offered, but I would have got 12 for the free shipping Dnewman (...
With all that being said, I think you are on the right track with the heat sinks. Going back and reading this maybe has given me a little more...
"jetguy" The stepped bore controls the melt pool and helps shear off the melt pool during a retract to prevent molten PLA from seizing to a cold...
My other option was to remove the switch from the board and locate the board remotely. I like Nicks solution the best.
Jetguy posted a good explanation of the stepped bore thermal barrier and its benifits to PLA. I will grab it when I get a second. It involves...
I think the griffin printer was going at some ludicrous speeds, something about molten filaments backing up into the bowden tube. 120 mm/ss,...
Could you post some pics of your hot / cold ends. Do you have a fan cooling your cold side? Does the Bowden setup have a similar heat break then...
I know you're now using Bowden... Are you still using that aluminum chassis bar, similar to the one from qubd? Over in the clone world that...
So, I wasnt sure if you wanted to stay bowden or not, and I only linked the qu-bd as a stateside, alternative to buying a whole new assembly....
How do you store your filaments? Do you measure diameter and input into slicer? when you say throat tube, I am assuming you mean your ptfe...
I will set up X and Y to home to min, the back right corner. The XY steppers will be the rear of the bot, due to the single centered lead screw....
Sailfish vs Marlin, I found this post pretty much sums it up Well, Sailfish has a leg or two up on Marlin in other areas. E.g., extruder...
While my clone is being cranky with the PETG, its printing the ABS like a dream. Chugging along on this mock up, have my Z stage mounted, I have...
