Separate names with a comma.
Some features disabled for guests. Register Today.
Yeah, we do this all the time thanks to Josef Prusa but it has been found out that a 2 motor Z drive on one driver DOES lose sync. I was telling...
Right, I know, but my point was 100 pounds on that beam should bend it much farther down than 1/10 of 1mm. I am not believing SW's numbers though...
How long does it normally take for items to be restocked in the store?
If I threw a thousand pounds on it it should not only deflect but squash too. If I had my nephew stand on one at 100 pounds it would not be able...
Same as always 500mm
I am seeing -0.001101mm maximum deflection using 1lbf and that would be directly in the middle and when I changed that to 100lbf I see a maximum...
Either would be unrealistic so this may be a SW issue.
Oh, I got it to work the simple way and the issue was I needed to add a load which is Gravity. In your auto way I noticed that was the only...
Got it and this is 400N of downward force.[IMG]
Yep, using the flat as the plane to build off of but no dice here. :/
Yep, I tried that and no go. I tried to extrude as one or have separately and it just will not work. Care to share the file and I can match it...
The line explain what ya did there please. :) What plane did you use? Mesh failed on that one piece so something I am doing is not right.
WOW!!
Yep, you did well my friend and that study was about what I expected out of extrusion and if you look at say Misumi's extrusion I expect there to...
Please do as I would like to learn how to get this beam deflection to work using this technique and in that picture that is twisting and I...
Fixed on each end of a solid 1 piece 500mm V-Rail with the 1 sq mm pad in the middle. Treat as beam was used on the v-rail and I did everything...
Try as hard as I could I can't get that to work. I get it all the way to the run and the solver stops and errors because it has numerical...
Easy enough to do (I'll use a 20mmx20mm square right in the middle but how thick?) and I will report back when I get 'er done. :)
Ends are fixed and I used this technique on one of the V-Rail pieces from the library using 6063 t5 - [MEDIA]
I am sitting here trying to figure out what I am doing wrong in Soildworks' simulator because none of the numbers I am getting match up. Do these...
