Separate names with a comma.
Some features disabled for guests. Register Today.
Regarding mounting it, i think you may need an adaptor plate, unless you don't mind having it offer centre of the Z-Axis extrusion. On the OX, you...
@NLucier Thanks for ordering with us, we will get it to you (And wife) as quick as possible. @Muxa Good to hear you chose us. The only issue we...
No problem, we have the kits in stock, we have just been so busy with the OX, we haven't got around to building one for ourselves, picturing it,...
Hi, them parts used on the power supply in the full kit, we don't sell individually. They can only be bought as part of the kit. Ryan
Ok, thanks for the info.
Hi, In GRBL, with hard limits enabled, we have encountered an issue that the limits are triggered when the xPro is set to fast decay mode. This...
Openbuilds was here many times. [ATTACH]
No problem, glad we were of good help!
Today we just released a full kit that we have been working slowly on for some time. This builds upon our existing mechanical and uses the CNC...
@sturgeo I definitely think this is possible. I would probably not have the spoiler board supports, and sit the spoiler board as low down as...
I don't think you have a problem drilling holes. How long and wide are these boxes? because you could clamp them in-between the spoiler board...
@mel earp I have sent you an email to resolve this issue.
Strange issue, but we just bought a new disk sander for workshop, and it has a dust extractor with a grounding lead, the manual advised that it...
@killRMODZ Thanks for keeping us update with the pics, looks like your getting there. @Mika Köpberg 400W will be fine for most tasks, but yes if...
3kg will be ok, i wouldn't go any heavier though.
Thanks for the info. Does that mount fit directly to the 20x60 extrusion without any mods? Edit: Sorry just looked at your pictures and saw you...
@killRMODZ They should be all the same, do they have the openbuilds markings on the side? If so here is the datasheet:...
Good to hear you got it sorted.
Your first issue to me looks like your pulleys are slipping on your motor shafts, so i would check they are tight, with one grub screw on the flat...
@Pops Yes some bolts and nuts at each end would do the job fine.
