Separate names with a comma.
Some features disabled for guests. Register Today.
Unless the teeth of the upper and lower belts stay locked together to where the upper belt can't stretch along its length having two belts would...
If you are gripping C-beam do be sure and grip it across the solid side (i.e. legs up). (That probably didn't need said but I figured better safe...
Remember, you're only milling aluminum so there is no need to put a cheater bar on the vise handle to tighten it down. Seriously though, I suggest...
How much it will support is irrelevant. How much it flexes under load is what matters. And a 120mm deep section will have over 3 times the...
Far too much weight and power for a hobby grade system like the Ox.
I hope you meant vise... :)
You might do forum searches for "drag knife" and "fabric". These topics have been touched upon several times over the past few years and this...
End holes need to be threaded to receive the screws. [IMG] Self Tapping Screw may also be used without tapping.
Not much of a chance for that here as most suggestions are little more than guesses.
Yes, it's still a good basic design. About the only thing I would change would be to increase the gantry beam and make it a little stiffer but...
An often used quote about electronics. All it takes is a stray spark (or random intergalactic photon) to change the nature of electronics. Could...
Saw your write-up on Instructables this morning. Very nice work. :thumbsup:
Just as an odd thought, you might try adjusting the micro stepping on the z-axis just in case this is a step count issue. As in the board has no...
Actually it was a vote of the people and I wonder if Putin had a hand in swaying that vote...
Thank you for the explanation. This may solve a problem I am having getting an 18v motor to run off a stock power supply. I hook it up directly...
Steven, can you offer an explanation of the smoothing capacitors, their purpose, and how such a thing would be sized? Thanks, Rick
Win 7 Home 32bit runs perfectly fine on 2gb. I run it on an old 1.6ghz atom based netbook without any issues. But I do understand the difficulty...
If you do want to do a screw conversion at a later date, this project offers suggestions as to how to get there economically OX-Metal CNC Router Mill
Would upgrading the computer to Windows 7 solve the problem?
Screws are a bit of a trade off. While you get a machine that moves in smaller increments you also get a considerably slower machine. Which is...
