Separate names with a comma.
Some features disabled for guests. Register Today.
It depends on what batch your board was in. But if you have bought within the last 2 months, you solder for slow to get fast decay mode.
Hi, So a batch has been printed incorrectly. You need to solder for slow decay, to get fast decay. Best Regards Ryan Lock
Ryan Lock published a new build: The WorkBee is our latest CNC Machine and is a culmination of all our experience, feedback, and suggestions from...
I think you could have one of the boards where it is printed wrong. So you need to solder the other pair as you have described. Ryan
@Bjorn Mikkelsen Also for the juddery motion under 800mm/min, putting the board in fast decay mode would solve this issue. This is done using the...
Hi, For issue 2 the only thing you can do is use small bolts and tee nuts to join the two 20x60mm rails together, so they don't act...
As it looks to be on direction changes, i would think it is a backlash issue. Maybe the pulleys slipping? Try cutting a circle, and see if it...
Hi, Ok they are quite heavy. I would go no larger than the 800w spindle. Yes it is a significant weight.
Hi, I believe a 2200w spindle will be to heavy. Has the manufacturer got weight specs for each one?
Hi, Are you zeroing the machine before starting the job? Best Regards Ryan Lock
Hi, I am afraid for the C-Beam the biggest would be 1000x1000mm, screws whip if you go any longer
Hi, We should be getting some Bluetooth modules soon which will hopefully solve these issues :)
For the interference is the router wire running anywhere near the other wires? If possible it would be good to have router power wire going...
What Ryan said. Or you could turn the spoilerboard supports 90 Degrees and drop them down. Then inset the spoilerboard in between the front and...
Hi Simon, Great, thanks for the update. Best Regards Ryan Lock
Hi, Great, now you have that working, i would try getting 1.1 on it. Ryan
Hi, You could try changing the grub screws to some small m3 bolts, you will be able to get a tighter turn on these with stripping the head. Ryan
Hi Simon, Seems you have tried most methods. I have had success flashing the eeprom clear program in arduino to the xPro first, and then flashing...
Great news :thumbsup:
Hi, I am thinking maybe in the incident some of settings could of got wiped. Is $4 still set to 1? As this would show similar behavior. Ryan
