Separate names with a comma.
Some features disabled for guests. Register Today.
Understood. I just thought it might show what those "black diamond - question mark" symbols were representing. That symbol is what is output...
@MplsArtist, I just noticed that you are using 1.0.9 version of UGS. You might try one of the nightly builds: Download - UGS to see if the...
If your USB/Controller connection is exposed, you might blast the port with some air. Someone elsewhere had a problem with dust building up in...
Have you tried with a different computer? Maybe a different USB cable?
Maybe you need to adjust the pots on the stepper drivers? (I don't have the Xpro, but my Gradus M1 Pro had the same symptoms when I first hooked...
The 8mm threaded rod is slightly undersized and it is clicking on the inside of the bearing most likely. Another contributing factor is that on...
I am using a 2-flute 3/32" bit (2.38mm) at 12000 rpm. My max stepover is 1/2 bit diameter (1.19mm), max depth/pass is 0.3mm. My feed rate is 762...
Congratulations on your impulse buy - you won't regret it! First of all, your router might be too large for the MiniMill. The spindle mount will...
That looks great Rick! To keep the legs out of the FOV (at rear limit), he could do away with the legs and mount the X axes to the tailgate of a...
Thanks! That gives me some ideas of what to expect - I'm going to give it a go tomorrow...
IMHO, getting the ends square is the most important. I swear by my new hacksaw mitre box! Wayne Goldman Model 534 Hacksaw Mitre Box
AK, I see you used about 10% power with your 2.8W laser. I have a 2.3W so I am thinking 15% would be about equivalent. I am curious if you ever...
I just noticed your G-Code. Grbl does not support M6 (tool change) - you can safely delete that entire line. I don't think G40 is supported...
The CAM module on Fusion 360 produces good g-code for me. Fusion 360 is free for hobby use.
If the MDF is accurate enough to properly locate the holes (or to cut a thin template material), I don't see why you couldn't do that, and finish...
I predict a landslide.....;)
This is a plate to mount one of several laser modules from Banggood to an OpenBuilds Spindle Mount. It should work with the EleksMaker series...
Scotty Orr submitted a new resource: Laser Adapter for OpenBuilds Spindle Mount - An aluminum adapter to mount a Banggood laser module to your...
Here is the SVG file. BTW, super thanks to @WildBill for the idea!!
Scotty Orr submitted a new resource: Laser Engraved Spoiler Grid (200x200) - A 200mm x 200mm grid for your spoil board The download is an DXF...
