Separate names with a comma.
Some features disabled for guests. Register Today.
Does this actually work? I'm running a gradus m1 pro board and bCNC. Gcode is being created by estlcam. When it comes time for a tool change the...
I turned it on and ran a bunch of stuff. Seems like the motors stayed cool. I'd ask Panucatt but I don't want to overwhelm them before I get an...
Hmmm.... I'm running a Gradus M1 Pro board with bigfoot steppers. If they are throttling down then they are throttling down to the point a hard...
So, I really want $1=255, right? Any reason to not do this other than the motors and drivers melting?
I have an idea as to the problem. One of the y stepper drivers stopped working. The jumpers for the steps and whatnot were not actually soldered...
The mount is poorly made but I have the top of it parallel to the x axis. Same for the 4020 it is connected to. (Well the run along that is...
What is the best way to do this? I have a 400w Chinese spindle with the 58mm mount (or 55. not sure.). The mount is a bit iffy and I have it...
I redid everything and it seems to be working fine.
Does this work? I keep getting no feed rates specified as an error. Trying to use this with the Gradus M1 Pro. I'm not using the Estlcam CNC...
Cool. I have a ton of homing switches but I'm not sure about hooking them up. I think it is my spindle driver that doesn't work right with the 10v...
Yeah, I haven't gotten that to work the way I wanted. Otherwise the m1 pro is working fine. The key thing is to have a fan on the drivers. If you...
It seems peachy today. Using Firefox btw.
Thanks! I'll give that a shot. It was 10v when I measured it before. Didn't check how it moved, tho.
Seeing a millionOperation is Insecure messages on start up of this.
So, is this supposed to do something? Connecting it to a WS55-180 BLDC driver to a spindle without a hall sensor. I can't get the spindle to, um,...
Been working on my Ooznest knockoff. Gradus M1 Pro $60 400w spindle from Banggood with driver. Only real mod was to use 6020 instead of 8020 for...
So I bought the OpenBuilds spindle mount and I need to connect it to the z axis of my Chinese Ooznest Ox knockoff. (Ripoff, actually.) Looking at...
After looking around I think the TinyG is probably the better board but no so much to be worth throwing out what I have. Also have the missing...
I have the Gradus but Panucatt stiffed me one of the bigfoot drivers and all the heat sinks. Kind of thinking I should just get the tinyg and use...