Separate names with a comma.
Some features disabled for guests. Register Today.
I did need to add extra support after modifying my machine to have a lower spoiler board. I used a bit of the 20/40 I removed from the original...
B&Q's saws usually have a fine kerf, so I expect to get three boards 1220x810 out of a full board. I intend to leave them the full 4' as I want...
I have found my Y axis noisier at times - a spray with silicone lubricant on the leadscrew reduced the noise significantly. If your wheels aren't...
Just a thought - is it just one side of the the Y axis that is noisy? If so is it the side you had the loose leadscrew on. If that is the case you...
Good idea Colin (emergency stop button) - once you have got your homing cycle working I suggest you untick that setting "allow moves without...
Just had a look at the picture in your build report - your Y axis limit switch is the right way round and in about the right place (on the inside...
Who did you get your workbee from? If it was openbuilds contact the parts store. Alex
Good point, the X/Y/Z probe macro should probably declare inches or mm as at that stage it is likely nothing else has been run. Alex
Yes, but @Award is referring to two different macros - G21 is only in the Z probe macro. It is not included in the X/Y/Z probe macro. Alex
Thanks @Colin Hart for posting your cam problem, I think I have learn't more from looking at that and @sharmstr's tips than I have in hours of...
Hi @Award, I can't answer most of your questions, but which version of the workbee have you got (ie what controller are you using). The answers...
First things first Colin - check all the wiring for that Z motor, especially the connection to the duet. Be careful there - I found the connectors...
Thanks @sharmstr. Which post processor though? Colin and I are using the Duet controller which uses Reprap firmware - not Grbl. Alex.
Hi Colin, I have had a further play - @sharmstr was posting her response as I was composing mine. I think you need to read both responses...
Hi Colin, I am a complete beginner on Fusion 360, but I tried something similar to your project. Setup with 20 mm stock side offset, 6 mm tool,...
Thanks again @sharmstr, that looks a); really straightforward, b); extremely useful. Alex :thumbsup::thumbsup::thumbsup:
Many thanks @sharmstr, I will have a play with those this afternoon. Alex :cool:
I don't know the dimensions of the Oozenest dust shoe - I printed my own. Haven't got it working yet because I haven't worked out how to attach...
Hi @sharmstr, I'm old and British, so I am happy working in either imperial or metric - in fact I have been known to mix the two - larger numbers...
Depends which way round you fix your dust shoe. If you have it so that it sticks out in front of the router (along the Y axis) it will have little...
