Separate names with a comma.
Some features disabled for guests. Register Today.
Please take much shallower cuts Benjamin. What is happening with the X axis? Alex.
When you say you are using the M92 command do you mean that you are changing the settings in the config.g file using the system setting editor in...
@Rob Taylor's advice is spot on @Benjamin Vg, while trying to work out what is going wrong just scratch the surface - 0.1 - 0.2 mm deep so that...
Hi @Benjamin Vg, sorry to hear you are still having problems. A couple of messages ago I asked whether, after moving 1000mm, the machine would go...
That is a big box @G-Wizard! Like you I worry about the neighbours, especially when I am running the router and the vacuum! (the vac is noisier...
Post a new message - there is a box (Upload a file) next to Post Reply.
It's not fair to tease us like this @G-Wizard! Post a pic! Alex. :ROFL::ROFL::ROFL:
You need to copy the OpenbuildsGRBL.cps file into your Fusion 360 post processor directory. @sharmstr's link on how to use a local post processor...
Shouldn't be any problem with the technical stuff then. Alex :ROFL::ROFL::ROFL:
Welcome to the forum. Looking forward to what seems like an interesting build. Alex.
Hi Guys, I don't know whether this is of any use to you, but have you explored the field of robot control? My son used a roboteq motor controller...
I posted the wrong link above @IndabaLondon (went to the Openbuilds one - nothing wrong with that but I meant to give you a UK source) IoT Power...
What Peter was saying is that you can use the output from the blackbox to switch a relay which, in turn, switches a mains socket. Google "IOT...
Your psu is capable of supplying 17A - what you draw from it will depend on what you connect to it. (Plus what Peter said above - he types faster...
The blue is the signal (NO if you are configuring the blackbox for normally open limit switches I believe - not an expert on the blackbox) red is...
Click on the build tab above, scroll down to the videos, select the wiring one - 42' in it tells you how to connect the limit switch wiring to the...
As long as you are not putting too much sideways strain on your bit the limiting factor is the length of the cutting edge (1-3/4" is a long bit)....
If you really can't find the markings it's very easy to identify them with a meter set to continuity/resistance - continuity/low resistance =NC...
Could I persuade you to post this in resources - it will be easier for people to find there. Alex. :D:D
The wiring to the switches doesn't matter - they will work properly whichever way they are wired. Alex.
