Separate names with a comma.
Some features disabled for guests. Register Today.
There is, but you have to remember to Home the machine so it knows where Machine Coordinates are :) Step 1) Home machine to set Machine...
Then Will help
See Wiring - how to handle router power
In that setup, the router. Is it earthed? Does it have a 2 or 3 core power cable (might have a 3 prong plug but "double insulated" and no earth in...
Having 5 switches, no. Not by themselves. But some nearby EMI source (it's best to address the source, where it comes from, than trying to protect...
If you cannot solve the EMI issue electrically, you can Disable Hard Limits (using Soft Limits and Homing instead)
A $2 arduino nano clone, flashed with Grbl, sitting on the desk will do the job.
Tb6600s are dubious drivers at best. More often they are the worse TB6560 relabelled as the TB6600s. Theres a reason they are cheap... Money...
Best to discuss store related matters, with the Partstore directly at http://support.openbuilds.com/support/home (: This is the community forum
Workbee vs LEAD series... keep in mind the LEAD is more modular - if you intend any future modifications (:
You can resolder that quite easily, as its a through hole part, or http://support.openbuilds.com/support/home may be able to assist you with a discount on a...
What happened specifically?
Power supply fan is temperature controlled Extinguishing arc usually accompanies worn out consumables. Regularly replace the torch consumables,...
It will have no issues with the NEMA23s (those are our motors yay) The NEMA34 will run, although underpowered by about 50%. You might be better...
Depends on the actual specs. NEMA is but a mounting pattern, describing the bolt hole pattern and face dimensions. It says nothing of its...
Also see docs:blackbox:iot-and-laser [OpenBuilds Documentation] If you have both laser and controlled router
Try the macro as is, as far as I recall Grbl doesnt need a reset.
Right across the top of the window.
Consider getting a BlackBox (:
See:
