Separate names with a comma.
Some features disabled for guests. Register Today.
This table will help you get started with some ball park figures. Speeds and feeds Alex.
Don't probe X and Y with the bit - use an accurate rod. X and Y are set at the centre of the bit, so having set X and Y you just need to probe Z...
@Randy had installed the post processor in the directory for the personal post library as I first suggested, just needed some help in using it...
:thumbsup:
I'll message you when I get the PC warmed up. Alex.
I'm UK based, so its nearly my bedtime :sleepy:. Should be able to find time tomorrow - I guess that would be afternoon your time if you are US...
@Randy I can do that if you have Team Viewer. Alex.
See the pic below - when you have downloaded the Openbuilds post processor, copy it into the directory shown, and select "Use Personal Post...
By "home user edition" I assume you mean the "personal use license". All you need to do is find the post processor folder for Fusion and copy the...
These instructions should work. How to install a Personal (local) Post Processor in Fusion 360 CAM | Fusion 360 | Autodesk Knowledge Network Alex.
What controller are you using, and therefore which post processor? Alex.
You only needed to re-probe Z after a tool change. X and Y are set at the centre of the bit, so you don't need to to re-probe those for a...
No - the blackbox runs grbl - it is not compatible with Mach3. Alex.
Mostly the wood. Use a sharp bit and try running a finishing toolpath (leave some stock in the first toolpath) or try running the toolpath a...
Your spindle doesn't use a vfd though - it's a brushed motor running on mains. Alex.
^^^^Agreed - that's a workbee. Alex.
First thing to check is your stepper motor wiring - from your description it could be an intermittent connection on the wiring....
The software does the hard bit. I use CorelDraw occasionally, but with the Vectric software you can design in the software, create a toolpath and...
I would recommend the Makita router - has a lower bottom speed than the Dewalt and a better reputation for brush and bearing life. You won't get a...
No, I think you do have to change the homing files - Rep-Rap allows you to re-configure settings "on the fly" - you could in theory run a job with...
