Separate names with a comma.
Some features disabled for guests. Register Today.
Video begs to differ (:
Also please double check this. If X and Y motors are swopped, it might also be that it tries to move off the X switch, but Y moved instead thus...
Check the grubscrews on the shaft coupler between the X motor and the X leadscrew. Perhaps its slipping during the direction change
Yes, Soft limits will always protect the machine if its properly set up and you did home.
I don't see the beam twist as much, but I do spot two things moving and one sign of wear [ATTACH] 1) The shadow behind the Z axis C-Beam gets...
Right after Error 8 comes up and you close it, switch to the Troubleshooting tab and screenshot please. No jogging nothing. In this state, any...
Include more pics, Y, Z some of the wiring and connectors wouldn't hurt either
Valid possibility: @protozach see docs:blackbox:install-windows-selective-suspend [OpenBuilds Documentation]
Confirm. Don't try random switching. Use the tools in CONTROL - making sure you understand which axis is which, that the right switch is installed...
Yes, much better $23=1 ; Homing direction invert, mask This is expecting the X switch on axis minimum, Y and Z at axis maximums (IE machine...
In do notice the gaps under the corner brackets - the build video has it the way you have it too, but a tip here is to sand off the little nubs...
Still blank. Open the file before you post.
What was the onscreen error on the end of the video Homing has two phases a fast search, and a slow locate. XY moves at the same time till both...
@Alex Chambers you really should get a Grbl board to play with (; - individual axis homing is not a default option in Grbl - you have to recompile...
Test switches on the Troubleshooting tab, not working or wired to wrong axis port perhaps?
It waits for the second axis to hit on the seek stage before it does the final locate move and pull off usually.
Could be EMI : docs:blackbox:faq-emi [OpenBuilds Documentation]
Power supply or stepper drivers shut down?
Depends on what you currently have? If you have a bad PSU that surges and killed the current controller resulting in the symptoms you see, it...
Carriage relative to beam, or beam itself twisting?
