Separate names with a comma.
Some features disabled for guests. Register Today.
There is really no compatibility between the two. You will probably need to modify any connectors used or create your own. Short pieces of...
You might consider a full depth, thin steel plate on the back face of the rails. Just a 3mm plate would add a fair amount of stiffness. You would...
No. More like 1270 - 750 = 520. But you should be able to get more than that. Jog it around a bit to see what your actual window is.
As a suggestion to maximize travel, consider mounting a L Bracket - OpenBuilds Part Store in the space just above the cast corner bracket that...
If you would like a different configuration than is shown in the shop, please contact the shop for a custom quote. Taking the Y-axis up to 1500mm...
Out of the blue I have started receiving emails on new thread posts, claiming I'm following these threads when I've never commented or even shown...
Not in a satisfactory manner. The problem with long lead screws is whipping of the screw, where the center bows out in a wide arc as the screw...
No. Steppers work by cycling back and forth between the A and B coils and you can’t do this with a solid current. If you’re looking for a...
Now that's interesting. I was trying to post 'contact @ openbuildspartstore. com' (without the spaces) and it shows up as...
Yes to all. You'll also need a longer lead screw for the Z-axis.
Valid question! Probably does but always best to ask the parts store http://support.openbuilds.com/support/home for verification.
Fairly simple to do with an L-bracket attached to the side of the mount.
Should. Ref: High Z Mod for Lead CNC
Yes.
Consider putting pivot at the center of the table top and rolling the whole assembly upside down. Whatever you do though, be mindful of gravity...
OpenBuilds is a small business and 24/7 phone support and fancy showrooms are just not viable. Product support/questions is handled through email...
Yes, and with a couple of simple adjustments it will do 22.5" x 48" which means it'll almost do an 8 foot sheet, 2 feet at a time. Yes Was a...
Yes, the frame members should have been 722mm or just shy of 28-7/16"
My guess would be: [ATTACH] But again, that's just a guess.
If you’re worried about the nut blocks and maybe them having too much friction I suggest spraying the lead screws with a dry silicone or dry PTFE...
