Separate names with a comma.
Some features disabled for guests. Register Today.
No real need for that - Grbl settings are stored on the controller not your computer Our standard profiles does NOT enable Soft Limits (because...
Not enabled by default (Bluetooth is slow, unreliable - rather use a USB cable. It's really not worth your time to try using Bluetooth for this...
See File open doesnt remember last folder used. · Issue #270 · OpenBuilds/OpenBuilds-CONTROL > Electron wants us to rewrite large parts of the...
No thousand apologies for forgetting to turn on the ganged axis when I compiled, and your patience with me! And the help with testing (: Probing...
1) What does the DRO say - how far from Zero are you before you click Zero. Does the actual distance and the DRO number look right? 2) Check your...
Logged a bug report for you, thanks for letting us know: jog speed in the mobile jog widget does not change jog speeds · Issue #280 ·...
Checkout our comprehensive setup video, that also goes over loading the Machine Profile [MEDIA]
What machine/controller do you have? If its ours, that's all already done for you in our profiles in our software
If you are very new to this, set Soft Limits off - it is confusing for a beginner, you can always revisit. As part of the learning curve, reading...
See Grbl v1.1 Configuration · gnea/grbl Wiki. Soft Limits and Max Travel, as well as correct Homing Direction are all relevant.
That means Soft Limits prevented a crash - your gcode were trying to exceed the bounds of the machine. - Or, you forgot to Home (Soft Limits...
May I beg a minute of your time to beta test this before I run a release (: - just as another sanity check 1) Unzip the attached ZIP file 2)...
You forgot to HOME. Fusion uses Machine Coordinates in addition to Work Coordinates. Home first, then Set Zero
Well that'll need fixing! (:
$11 should be 0.01 [ATTACH] I
I accidentally forgot to enable Y2 in that firmware (fixed the probe, but disabled Y2). Power outtage here at the moment, will post an updated...
Most plasmas wants you to close contact between those two pins. BlackBox provides a relay for that
Make sure your firmware is up to date (1.57) Then hit Abort - it first pauses. Then asks you if you want to Resume or Stop. Leaving it on pause -...
Impossible to be software related. Grinding noise from a motor usually means wiring: one or the 4 motor wires broke or came loose. See...
Good catch. V1.0.338 of CONTROL has the older firmware. Will push out an update for the Y2 issue today as v1.0.401
