Separate names with a comma.
Some features disabled for guests. Register Today.
Incorrect, should be 7 Incorrect should be 1 Incorrect, should be 511 Couple others too, but that's enough to prove the machine profile was not...
Yeah, that was fixed since in the V1.2 switches
Which brings us back to: No status change indicates one of the parameters our profiles sets in relation to reporting is not set correctly,...
Use the Troubleshooting tab and test all switches, making sure a) that they all work and b) more importantly shows up for the correct axis.
Did you load a machine profile. The lack of reporting and limits error indicates issues with Grbl Settings. CONTROL > Grbl Settings tab > Select...
Yeah GD32 is a (possibly illegal) clone of STM32 chips, and Grbl itself never ran on STM32 either - weird mess of forks and clones. At the end of...
Those are somewhat seperate questions. Glad you are on V1.0.370, but did you perform the firmware update as advised in Section 7.1...
Your backup file is empty. Make sure to be connected first, then Backup. Open the text file and review before posting Your screenshots 1,2,3...
Contact the store via Support > New Ticket - they might be able to assist. Thanks
Yes Max Travel is used for the Soft Limits calc. In Z thats a moving target (endmill lengths differ) so not really useful, might as well as it to...
Make use of Grbl's Door sensor feature, instead of using the switch as a Feedhold. It has a full fledged door sensor option instead
Did you work through the Blackbox Docs? (didn't maybe skip section 7.1)? Did you transfer your old working Grbl Settings (Backup and Restore...
CONTROL requires grbl or grblHAL. Gd32 seems to be some chinese fork of the almost decade old Grbl0.8/9
Ps. Hitting the switch, and the Soft Limits error are contradictory (read error in screenshot). It would error for Hard Limit if switch was hit......
Now execute G53 G0 Z-10 and your Z should move down from -2.5 to -10 (7.5mm of downward movement). Confirm by observation and rechecking MPos...
Post your settings backup if you'd like us to review
Did you remember to load our recommended machine profile (CONTROL > Grbl Settings tab > Select machine from the list > Save and reset when...
1) Home the machine 2) hover the mouse over each of the DROs and note down the Mpos values shown (note just after homing. Don't change anything...
That's about the only thing in your control. Making sure the phone is on the local (wifi) network (internet access proves nothing as that might be...
Your home network. It should already exist. On your premise. Ie same wifi network, or if the PC is plugged into a network cable, well, make sure...
