Separate names with a comma.
Some features disabled for guests. Register Today.
there are so many variables! are all these tests with the same USB cable? that might be the root issue, bad cable, bad life (-: are some of the...
you do not want an Uno nor Blackbox based system anymore since a grblHAL based system with something like a Teensy board can do all of what you...
Hmmm, found some interesting things in the plasma processing.... go here GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor...
I will look deeper at this later but so far I can see that his gcode thinks the tool diameter is 1.38 inches. ( Tool 3: Plasma Cutter Diam =...
yup, seeing the same behavior when your settings are loaded. Will check later against the BB X32 as well, and maybe run it on my router (belt...
thankyou, I will load this into a controller later and test again GRBL 1.1g as loaded by CONTROL.
wrong (or different) GRBL version. when I load GRBL for the 4x from openbuildsCONTROL I get version [VER:1.1g.20181112:] please flash this...
turn homing off and use the 'fake the home' method instead. this means home is where it turns on or resets, so you only need to make sure to park...
that would be trying to move in inches instead of mm. G20 and G21 are modal commands, they are remembered until changed all macros must always set...
you don't mention it so lets check, you are jogging to the point on the material that you indicate din the CAM is the 0,0,0 point and clicking the...
yes, in V1.0.0.38 GitHub - OpenBuilds/OpenBuilds-Fusion360-Postprocessor: Post Processor for Fusion 360 for use with OpenBuilds Machines running...
in the background of that error message the GRBL version is displayed as V1.3a Rabbit GRBL for the ESP32 I am pretty sure the since CONTROL is...
Well, I have now barked at this tree for a couple of hours: a) both your Gcode and any Gcode I generate is correct b) neither the 4X nor the X32...
it caters for router, laser and plasma machines it fixes small arc errors it reinserts missing rapid moves when needed it does not use G28 but...
when using the OpenBuilds postprocessor you can set the ending X and Y machine offsets to put your tool whereever you want it. DO make sure the Z...
sicne you did not post the full gcode that was not working, nor the project file from fusion, it is hard to diagnose in more depth. I can say...
it has to be, errror 33 only applies to arc and probe commands. please reset your $11 and $12 to the defaults, the defaults work and there is no...
replace your USB cable with a better quality, shorter one. follow ALL of the EMI recommendations in the docs, not just some of them. if you are...
you need a Blackbox X32 in CONTROL you use the wizard to flash the XYZA firmware. exit CONTROL reset the BB start CONTROL and it will show the A...
check matthias Wandel on youtue, he has made a bunch of vacuum systems which may do what you need
