Separate names with a comma.
Some features disabled for guests. Register Today.
Looks like a cheap Grbl based board, so motors not moving could only be (1) Incorrect setting for $4 Enable Invert in Grbl Settings (Try 1 or 0,...
That is a curious finding. Trial and error, or some documentation from the spindle controller side pointing at something it dislikes about 100%...
Sweeet another one saved by a Meanwell!
Why add a "$"? # this is a comment this is just code (not commented) $this is not correct - comments are done with #
If its one our machines, those with a single X-axis rail (LEAD1010 etc) we'd not go over 1.5kw. 0.8kw is usually fine for most. With the...
Checkout section 15 of Terms of Service and Rules | OpenBuilds
You don't maybe see PROBE FILE NOT FOUND? (i.e you forgot to copy the probe macro files?) docs:interface:prepare-usb-drive [OpenBuilds...
We're still waiting
Help = using experience to guide people away from bad ideas. Have a read through the provided info before you dismiss it
The more info you include the more we are able (and willing) to assist. Where's the gcode from that contains these non gcode commands. What CAM...
100% correct and I do mention that in my other post I shared above. Way easier to use a hard reference (square base, jog into end of travel lol)
Of course there are valid reasons. But far too often people try to fix a badly built machine using that
Well then the error is spot on. Valid gcode only please...
Rather build the machine to be square and true Black Box32 auto square
Looks like corrupted OK. Does your code contain a PK?
Did you do a Grbl Settings profile? (Steps per mm around the 200 steps per mm mark?) - please include Grbl Settings backup for review
Reboot. Just EMi from the Plasma messing with the Serial queues (:
Duplicate post, see Z axis getting power on interface boot, then losing.
See docs:blackbox-x32:currentadjustment [OpenBuilds Documentation]