Separate names with a comma.
Some features disabled for guests. Register Today.
Hello all, Is there anything specific i need to know about the Tool port on the BB x32? Documentation: h) Tool Enable: 0/3.3V signal reflecting...
No, unless something is very wrong Y is in parallel. 1 trigger will stop the machine. Heck, I've ran into the end of y lots without any limit...
In aspire and maybe vcarve there is a sharp cornering section.
I ran into this same issue while working on another project today. This saved me so much time. Thanks for posting this!
Can't adjust as in, you sent M3 S25000 and when turning it, it never increases past 3v?
Id be doing test cuts on scrap until you figure it out. First you need to work out if its the machine slip, or something you or the app is doing,...
Hi Ethan, Can you explain the problem in more detail? What's happening with your cuts that aren't repeated? I can't seem to spot it from the...
This is pretty much how mine is mounted to a wooden top and works well. A couple things I could see being an issue on stainless; It looks sturdy...
Hey guys, I've gotta saying developing some custom features into CONTROL has been great! The design is layed out so well and easy to follow. I've...
Great, thanks guys. I guess i should have tested globals myself first... I have a bit of a franken-setup where I control a mobile controller via...
Hello there, Just looking for a couple tips to point me in the right direction. Question one, can I share a variable from one JS macro to...
Thanks Peter!
Hi there. I have a stock lead 1010 with nema23s and the 24V/14.6A MeanWell power supply. I was just hoping to have it also power a Dm542+nema17...
