Separate names with a comma.
Some features disabled for guests. Register Today.
Thought I would post a follow up to this discussion... After making the change to the $376 setting (changing it to a value of 1) that Peter...
At this point, I would not know if time is a problem...lol I have only been trying to get the machine to function as it should... Chasing my tail,...
Unfortunately, no... mine is set to 0. I will get it changed and tested tomorrow. I have been searching all evening for more information on $376....
Ok... one last question before I conceede.... I followed these steps to generate a toolpath in VCarve: Created a rotary job Created a rounding...
Yes.... I am definitely interested... As I was looking at the pictures you posted, I noticed the OpenBuilds CONTROL software and that you're using...
Can the current adjustment potentiometers be changed while the BlackBox X32 is ON and connected too? Or, should it be disconnected and powered...
It is not the normal whining sound... I'd say the sound is more a "struggling" rattle... Just tried a continuos jog and it stalled to a stop.
After making the change and moving everything around with some gCode, I opted to swap the shortened X axis C-beams for the 1000mm beams that came...
Hi Peter... as you might recall (I attached the latest picture of my LEAD 1010 machine), I have been heading down the rotary yellow brick road for...
Let me first acknowlege how thankful I am for the help. I promice I am not trying to be a pain in the butt. :) I have VCarve Pro. But, isn't...
I was just reading the cookbook you sent and it says: ******************************************* The first 3 Axes are the familiar X axis, Y...
Thanks Peter for your reply.... But, as most of the references, discussions and builds that I have found and read, they most often fall in the...
Here is my lathe so far... LEAD 1010 with the High Z modification Reduced size of the width (X axis) to 21" OpenBuilds limit switch at Max of Z...
I tried reaching out to DeskProto but, they are currently rolling out version 8 of their software and I'll have to wait. But, I did find a video...
My machine is now ready to play. A true 4 axis (XYZ & Rotary) LEAD 1010. I just got the DeskProto Hobby CAM software... It was on the OpenBuilds...
After reading the "LEAD Lathe" from beginning to end, it dawned on me that I had read it before when I first started thinking about a rotary axis....
Got it... $3 -- motor travel direction, $23 -- limit switch location and $65 -- force a homing sequence... Thank you!!! Scott
Hello Everybody!!! I'm hoping to get help on the settings for my grblHAL machine... The following is all the info on my machine... I plan on...
Hey David.... Yes, you are correct about Z... It should have read "2 limitswitches on the Z axis at the MAX (home) and MIN extents..." and...
I'm entering into the electronics phase of my LEAD 1010 (with High Z mod) build. I have been planning on using limitswitches on the MIN (home)...
