Separate names with a comma.
Some features disabled for guests. Register Today.
I am using VCarve with a laser module. How do I set the laser pointer offset in OpenBuilds for a 16.5 mm shift on the X-axis?
Ok I have one more question. My power supply has output 12 v to black box. Does it matter?
I want to purchase the Laser Tree 80 w and connect it to the first-generation Black Box, but I don't know which one to buy: the 12V or the 24V....
Yes 6mm end mill :)
Yes
Hi! I'm using 6mm drill, RPM 19000, feed 3000, cut depth 2mm. Separate finish last pass 0.5mm. material: mdf. I'm attaching a photo of the groves-...
How do I adjust/ set the wheels? I need to stabilize the machine whitin x axis (see the video) I've stabilized and tightened all other things so...
I've tried your settings ad it's much better- thanks! How do you calculate all those settings? I've got a striaght 2flute bit 3,175mm?
It may be the machine, you're right.. I've tighten the Z axis as well as X axis (hope I did it right :) ) Should I tighten anything more? I also...
so I've tried several things: • setting an additional finishing path after cutting the element to run 0.13mm less than normal- it didn't help. •...
I've tried it today but it didn't help.
I've got Lead 1010 and I use cut2d pro. Everything works great, the etges of the material are smooth except the tabs. The last pass is set to...
I've bouhgt a better quality anti static dust collection hose and grounded it and it started to work, so thanks guys for your help.
I've additionally tried running the machine (in the air) without running DeWalt or Dust collection and it works fine.
anti static hose didin't help. The problem seems to occur always during the last pass. Today the program just stopped the work without any error...
Thanks a lot! It looks like the dust collection hose may be the cause- will try earthing it and see.
It cuts one or two elements and stops at the next one.
I always use cut2d pro, never had this issue before. It started yesterday in the evening- I've cut in the morning without any problems.
Hi! My Lead 1010 stops working in the middle of cutting since yesterday. Nothing can be clicked on when it happens even connect/ disconnect. Only...
Can you please provide a machine maitenance to do list for dummies? :)