Separate names with a comma.
Some features disabled for guests. Register Today.
Understood. Thank you again.
This was factory set to the 30hz. I did not change that setting. But should I?
I just checked spindle and it says speed 8000 - 24000 RPM. I also checked the vf parameter for min frequency and that is set to 30hz. So I should...
Hi Peter, Yes it is an air cooled spindle. That makes sense. So I can just go in to control and edit the M3 to start at 3800 RPM? Would that be ok...
Hi, I have the yalang YL620-A VFD ( this is the single terminal board ) and I got it up and running. I have it running with Control. it works with...
So I did my V carve today, using inside toolpaths and also outside toolpaths for the inner parts like the inner O of the letter O. I tried to make...
Hi, I got the pocket carve done using a 1/8" endmill bit. It took a long time to do that. 7hrs 40 min. (as you saw in my other thread ) Thank you...
my feed rate is 1000/300. using a spindle. spindle speed is set at 1695. I could probably go up more but if I go to high my machine starts to skip.
Machine is an openbuilds lead 1510. The bit I am using is an 1/8" endmil bit. Toolpath is a pocket. Just lettering. I use the openbuilds...
Hi My carve time is absolutely ridiculous. I have a simple pocket sign to carve. The carves are going from a short carve all the way to the other...
Thanks Peter.
Hi, I have this sign I want to make. I am looking to get it to pocket cut the letters but also have V cut angles on the sides. I figured I would...
Perfect! Thank you
I am currently using stencil models from online and bringing them into openbuilds cam software and creating toolpaths from there. I was hoping for...
Hi, Every time I import a picture with bold lettering and try to do a pocket carve, it includes the centers of letters when highlighted. For...
I got it to the right size. I used the wizard tool and calibrated my Axis points with steps/mm. And got my first job done. Thank you for all your...
Hi, I still am having this problem. I switched out laptop to a desktop PC. That solved all issues other than it is still cutting the size of a...
Hi, I am using the Blackbox along with the CONTROL software and the Cam G code generator software. I was trying to carve the free Hello world...
Thank you again Peter. I am not used to building a machine of this caliber. I am almost done. My previous hobby was lighting controllers and using...
Hi, I am a little confused on my X limit switch and what side to mount it too. From my reasearch it looks like it would go on the left side facing...
