Separate names with a comma.
Some features disabled for guests. Register Today.
using easel to carve,you can use openbuilts controller also at the same time with easel ?
is there a way to control my router,with my openbuilts blackbox ?
ok thanz
using 1/4'' end mill bit its leaving surface not flat why ?
the red icon on blackbox controller is blinking but no connecting to my machine to carve ?
ok thanz 4 all your help
no step skipping,the motors are warm to the touch,but if there not working there warm,but where I live its gets over a hundred some times,so do I...
ok what I did is use shorter usb cable and routed the wires away from each other seems to work just fine thanz 4 the help,plus the usb cable is a...
so are limit switches low voltage ?? and if they are keep them away from the motor cables
so are you saying need to buy shielded wire ?
my openbuilds blackbox controller keeps losing its signal why ?
wow got all axis zeroed,even did a gotozero xyz it work, 2 hips and a whora thank you all, but it only zeroed 1 side is that ok
now to set zero,jog machine until it touches switch and lite is on then click on set zero for that axis
so when i type in ''$H'' it sets up the machine for zeroing ?so now move machine to one of the axis switch and touch it then click setzero button...
set the machine co-ordinate system zero, no sure what that means?try to set-up limit switches, using openbuilts control, also very new to this cnc
set the machine co-ordinate system zero not sure what that means ? the machine will show me when its activated ? for just 1 switch, then do the...
dont see transfer to openbuilts control,or do click on generate gcode ?
great the more I get into the cnc stuff the more I get it ,will read that gnea/grbl pages thank you
so what I did is from 1 switch of set of wires, I join together with the other switch wires, when u press down on 1 of the switches the led lites...
