Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks, but that doesn't work, because it changes the rendering scale of elements within the chrome/container. The issue here is that the outer...
My latest update was from 1.0.376 to 1.0.388 and I'm runing CONTORL on a linux machine with Lubuntu. It runs well but, on the last update,...
Awesome, looking forward to it, especially to see how fix #308 behaves under Linux. Also, have the team or you had the chance to check if the...
Hi Peter! yep, 1.0.370. FWIW, under troubleshooting/Application Diagnostics there's an option to disable Native File Open Dialog. Disabling the...
Has anything change in Control where the software doesn't remember the last directory used? I run Control on a Lubuntu laptop near my machine and...
These steps might help other Mac users that need to update their firmware. We need several pieces of software. Fortunately, installing them is...
Thanks Peter! Followed that same post and it worked. Unfortunately CONTROL on Mac still cannot flash the ESP. I've made sure Python is installed,...
I have a blackbox v1.3 and can't figure out how to slave X over Y2 port. I found documentation for the BB4x, but nothing for the x32. Is it...
Thanks Peter, as always swift and clear response!
Oh, I repeated the tet on my Mac, and it didn't work either... until it did. I could see somehitns about jquery complaining about...
That's it. I'm not sure if I was running 1.0.317 or 1.0.312 before, but on the most recent version of Control, 1.0.321 as of this post, CAM cannot...
Thanks Peter. I see the point in that. I've just (like hours ago) been able to work with WCS per this other post regarding VFD/earth/Gnd noise....
I usually flip stock to machine guitar parts. Half of those are center joined wood blanks, so referencing my work to that centerline is critical....
I've had the sme issue since always, but learnt to live with it. Basically I unplug my VFD whenever I needed to probe (mostly in the middle of...
Yep, that's what I did. I am just curious as to how things work.
Thanks Peter I assume it's not trivial to just have it use the next unused port because that would mean than OpenBuilds CAM would no longer know...
I've found a mistake on my end that made me smile. This certainly WON'T be a problem for common users, and I assume that users encountering this...
This is a simple shape, but it took 5 toolpaths: - surfacing - drilling - 2D pocket for the inside - 2D contour for the outside - counterboring -...
Just wanted to share my either genius approach, or a lucky attempt at tramming and resurfacing my Lead. First, I took out the spindle...
Is it OK to suggest features on this thread? If not please move or remove! I'd LOVE to be able so save toolpaths presets ... or to be able remove...
