Separate names with a comma.
Some features disabled for guests. Register Today.
Thanks for the reply, I found this in the junk folder found this why I was late replying. what the problem was, its came to me at 3:30 in the...
Was trying to run a small project today and ran into an issue. First, I am using vectric software using win 10 OS. Create the code, and move it to...
Thanks for the fast reply, tried the eccentric spacers, they are not able to move, I will try again Thanks .
I have some slack or movement in my Z axis. I am able to move it from side to side or from front to back. I have notice when I move it to left,...
Sorry it an STL file and site doesn't allow me to upload. Maybe do a search for last supper STL
Got this from another group who share this 3d model. Went into vcarve to set it up. First try 1/4 EM for the roughing. and 1/8 em for the finish....
OK you guys were right on the wire. After resetting the wire connection on both end, its still would not work, then I which cable with one that...
Ok, after more trouble shooting, I each individual wire in the cable for continuity and they check out. Also tested the wires from the motor from...
OK, I did check the wiring on both ends of the cable and they are in correctly, no insulation contact. Now not sure on what you mean by driver...
OK, connected the z motor cable to the y axis. It just sit there and shake, if that made sense. I fail to mention that I tried to do a home all...
I got this off a y tube where a guy was showing how he made his and share the file. I paint the stripes and emblem[ATTACH]
Hi I am having a problem with my z axis, when I press the Z+ in open build control, the the axis go down. When I press the Z- the axis go down. I...
Got it. I did it the second try and came out great. It was a bad grbl, the first time. I had three separate files, one for each bit. Thanks for...
I'm using three different tools for that. It was one of Vectric video that they did. But will try again, as it worked before. Thank for the help. Rod
Sorry,the reason I said openbuilds, I mention grbl. Maybe the gcode got messed up in the process. I was running it from my thump drive. But here...
Hi y'all Today I was carving out a sign using Vectric VCarve. This is a stack text sign, I notice it did not completed the carve as it look on the...
Here the project Re did the file, using the same tool and carving method. This came out to 369 mb.
Thanks , I will do that. A lot of detail in that file. I will keeps that in mind when I do my projects. Thanks Rod
The file is 173,000+ KB, this was done in VCarve desktop.
Hi all Was trying to run a Gcode file, using a 3/16 VBit. Tried to load the file into control software. It was taking a while to load and then the...
