Separate names with a comma.
Some features disabled for guests. Register Today.
cheers guys, seems to be related to the travel I have on my z axis , I reduced the The Safe Z or Rapid Clearance Gap and it allowed me to run the...
Yep homing successfully, can move to and stop at all soft limits . And move to work zero position correctly. It Will run the flattening code...
Hi all, My workbee1010 has been unused for a few weeks , i fired it up yesterday and its reporting a problem when trying to run g-code ALARM:...
I have removed the screening of the spindle cable from the vfd earth connection side and left the connection on the spindle . 10+ job runs...
possibly same issue as Job stalling when spindle starts will look closer at the vfd and spindle
Hi all, I have a problem where the control software stops processing the g code randomly during a running job. The system remains in the...
i can second this usb isolator, it has fixed my issue as well.
so i have done abit more tracing this morning , i have disconnected everything apart from the pc to blackbox usb connection probe to blackbox AC...
the only thing left in the circuit is the 24v psu which has a earth and gnd
so with no direct cabling between the vfd , spindle and blackbox you sill have a short between AC ground and DC gnd.
i can confirm issue doesn't appear to be software related , just rolled back to v1.0.251 and issue still present . for reference my vfd is a...
i might be barking up the wrong tree , and i am still at testing stage . but i did receive a openbuilds control update this evening . i do not...
:thumbsup: or work flow change - disconnect vfd cable , probe , reconnect vfd cable
same issue for me . i have disconnected vfd cable . measuring on vfd terminals i have 78ohms between dc gnd and ac earth .
